{"title":"Cameras \u0026 sensors","description":"\u003cp\u003eUnderwater cameras and sensors: DWE exploreHD and stellarHD cameras rated from 400 m to full ocean depth, low-light USB cameras, and depth, pressure, temperature and water-quality sensors for ROVs, AUVs and research equipment.\u003c\/p\u003e","products":[{"product_id":"anb-sensors","title":"ANB Sensors Calibration-free pH Sensor","description":"\u003cp\u003ePlease visit the ANB Sensors pH Sensor product page to purchase.\u003c\/p\u003e","brand":"ANB Sensors","offers":[{"title":"AQ5 - 5 m","offer_id":58743297737078,"sku":"BR-102402","price":2000.0,"currency_code":"EUR","in_stock":true},{"title":"OC300 - 300 m","offer_id":58743297769846,"sku":"BR-102328","price":3225.0,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1017\/5745\/2662\/files\/ANB-PH-011.jpg?v=1789564639"},{"product_id":"anb-sensors-ph-sensor-spare-transducers","title":"ANB Sensors pH Sensor Spare Transducers","description":"\u003cp\u003eThe solid-state transducer is the sensing element at the heart of the ANB Sensors Calibration-Free pH Sensor. It doesn’t need routine manual calibration, but does need occasional light maintenance. After about 75,000 measurements, a light abrasion of the transducer surface with the included sanding pad is all that’s needed to keep it performing accurately. The sensor tracks this automatically and alerts you when service is due.\u003c\/p\u003e\n\u003cp\u003eWhen the transducer eventually reaches the end of its service life, it’s user-replaceable. The pH sensor includes the tools needed to remove and install the transducer. This replacement transducer is available in two versions, one for each depth rating, so make sure to select the one that matches your sensor.\u003c\/p\u003e\n\u003cfigure\u003e\n\u003cimg src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/1017\/5745\/2662\/files\/ANB-PH-remove.jpg\" alt=\"\"\u003e\n\u003c\/figure\u003e","brand":"ANB Sensors","offers":[{"title":"AQ5 - 5 m","offer_id":58743301013878,"sku":"BR-107319","price":375.0,"currency_code":"EUR","in_stock":true},{"title":"OC300 - 300 m","offer_id":58743301046646,"sku":"BR-107320","price":475.0,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1017\/5745\/2662\/files\/ANB-PH-015.jpg?v=1789564648"},{"product_id":"bar-depth-pressure-sensor","title":"Bar High-Resolution Depth\/Pressure Sensors","description":"\u003cp\u003eThe Bar series sensors are compact, high-resolution pressure sensors for underwater pressure and depth sensing. The aluminum body uses the bulkhead penetrator form factor, so it’s quick to install in watertight enclosure and is ideal for use on ROVs, AUVs, and other underwater projects.\u003c\/p\u003e\n\u003cp\u003eTwo models are available to suit different applications:\u003c\/p\u003e\n\u003cp\u003eThe Bar02 is a low-pressure, ultra-high resolution sensor using the Measurement Specialties MS5837-02BA. It measures up to 2 bar (about 10 meters water depth) with a depth resolution of just 0.16 mm and can also measure in-air altitude with 13 cm resolution. This makes it ideal for shallow-water devices where a high level of resolution is required. It includes a temperature sensor accurate to ±2 °C and is supported in ArduSub 4.7 and later.\u003c\/p\u003e\n\u003cp\u003eThe Bar30 is a high-pressure sensor using the Measurement Specialties MS5837-30BA. It measures up to 30 bar (about 300 meters water depth) with a depth resolution of 2 mm, making it a great choice for deep-water ROVs and general underwater instrumentation. The built-in temperature sensor has ±4 °C accuracy, and is supported by ArduSub and other ArduPilot firmware.\u003c\/p\u003e\n\u003cp\u003eBoth sensors communicate via I²C, operate on 3.3 V logic (with 5.5 V max power input), and come with a JST GH connector compatible with most flight controllers, like the Navigator Flight Controller and Pixhawk autopilot. The electrical schematic and board layout are fully open-source, so you can adapt the design to your own projects.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eThese sensors use gel-covered sensing elements that must be dried for at least 2 hours each day to maintain accuracy. Long-term submersion may damage the sensor.\u003c\/strong\u003e\u003c\/p\u003e\n\u003ciframe src=\"https:\/\/www.youtube.com\/embed\/geI2UIC6IPM?feature=oembed\" allowfullscreen\u003e\u003c\/iframe\u003e","brand":"Blue Robotics","offers":[{"title":"Bar02 - 0–2 bar (~10 m)","offer_id":58743306355062,"sku":"BR-100891","price":80.0,"currency_code":"EUR","in_stock":true},{"title":"Bar30 - 0–30 bar (~300 m)","offer_id":58743306387830,"sku":"BR-100586","price":90.0,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1017\/5745\/2662\/files\/BAR-VP-1.jpg?v=1789564669"},{"product_id":"4k-cam","title":"4K Cam Low-Light ROV Camera","description":"\u003cp\u003eAfter three years of development, firmware tuning, hardware tweaks, and field testing, the camera you’ve been waiting for is here. The 4K Cam for the BlueROV2 prioritizes what actually matters underwater: low latency, excellent low-light performance, and accurate color.\u003c\/p\u003e\n\u003cp\u003eWhether you’re inspecting infrastructure, documenting marine life, surveying an aquaculture site, or exploring somewhere no one has gone before, the 4K Cam gives you a clearer view of what’s happening below the surface.\u003c\/p\u003e\n\u003cp\u003eBuilt around the Sony IMX678 sensor, the 4K Cam delivers super sharp 4K video with spectacular low-light performance. It features a motorized zoom-focus lens with up to 2x optical zoom and a built-in tilt servo for camera angle adjustment. The sensor is paired with an image processor that supports H.264, H.265, H.265+, and MJPEG outputs.\u003c\/p\u003e\n\u003ciframe src=\"https:\/\/www.youtube.com\/embed\/VpKjw_TKAc8?feature=oembed\" allowfullscreen\u003e\u003c\/iframe\u003e\n\u003cfigure\u003e\n\u003cimg src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/1017\/5745\/2662\/files\/4K-Cam_03_770x400_38a1306c-4772-4e5b-9934-3be78047e67a.jpg\" alt=\"\"\u003e\n\u003c\/figure\u003e\n\u003ch3\u003eLIVE! From the Depths\u003c\/h3\u003e\n\u003cp\u003eLots of cameras can capture beautiful footage. Far fewer can help you confidently pilot an ROV.\u003c\/p\u003e\n\u003cp\u003eTypical IP cameras are designed for applications where latency is no big deal. Underwater, a little delay can make the difference between a smooth maneuver and an accidental rendezvous with a piling.\u003c\/p\u003e\n\u003cp\u003eWe worked to fine-tune the firmware and rework the video pipeline for the lowest glass-to-glass latency possible. You can expect approximately:\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e225 milliseconds of latency at 4K\u003c\/li\u003e\n\u003cli\u003e210 milliseconds of latency at 1080p\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003eThe result is a camera that feels responsive and predictable while piloting.\u003c\/p\u003e\n\u003ch3\u003eCount on the Color\u003c\/h3\u003e\n\u003cp\u003eFor cameras, underwater color can be very tricky. Thoughtfully designed white balance modes keep color accurate across varying conditions.\u003c\/p\u003e\n\u003cp\u003eThe 4K Cam features two color white balancing options. It defaults to auto white balance or you can manually trigger One-Push White Balance to quickly recalibrate the image and restore more accurate color.\u003c\/p\u003e\n\u003cp\u003eThe \u003ca href=\"https:\/\/bluerobotics.com\/what-is-blueos\/\"\u003eBlueOS\u003c\/a\u003e extension also includes presets for blue and green water environments, making it easier to adapt the image to local conditions.\u003c\/p\u003e\n\u003cimg src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/1017\/5745\/2662\/files\/4K-Cam_06_770x400_f7c0e537-3cc5-4df4-bf86-a4e769edcd70.jpg\" alt=\"Fallback image for unsupported browsers\"\u003e\n\u003cimg src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/1017\/5745\/2662\/files\/4K-Cam_01_770x400_e239a611-c1e2-4a22-9c26-f93a9ebec504.jpg\" alt=\"Fallback image for unsupported browsers\"\u003e\n\u003ch3\u003eC'mon and Zoom\u003c\/h3\u003e\n\u003cp\u003eSometimes you need the whole scene. Sometimes you need to inspect a singular bolt.\u003c\/p\u003e\n\u003cp\u003eThe motorized zoom-focus lens gives you both, with:\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eUp to a 94-degree horizontal field of view\u003c\/li\u003e\n\u003cli\u003eUp to 2× optical zoom\u003c\/li\u003e\n\u003cli\u003eRemote zoom control\u003c\/li\u003e\n\u003cli\u003eRemote focus control\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003eZoom and focus can be adjusted directly by the ROV pilot, making it easier to move between wide-area awareness and close-up inspection.\u003c\/p\u003e\n\u003cp\u003eThe camera sits on an integrated tilt servo, so you can look up or down without repositioning the entire vehicle. A built-in fan helps keep things cool during long dives and extended operation.\u003c\/p\u003e\n\u003ch3\u003eYour ROV Has Been Squinting\u003c\/h3\u003e\n\u003cp\u003eThink of it like giving your BlueROV2 a fresh pair of glasses. The complete camera assembly is designed as a straightforward retrofit (there’s a guide for that!).\u003c\/p\u003e\n\u003cp\u003eThe 4K Cam also fits inside our 4-inch Series Watertight Enclosures and larger enclosures, making it a rad option for custom underwater vehicles and robotics projects.\u003c\/p\u003e\n\u003cp\u003eBecause it is an Ethernet IP camera, your system will need an Ethernet switch.\u003c\/p\u003e\n\u003cp\u003e4K video is detailed and sharp, but also demanding. Decoding a full-resolution 4K stream requires more computing power than standard HD video, so we recommend using a pretty powerful laptop for the best experience. Check out the technical details below for more!\u003c\/p\u003e\n\u003cfigure\u003e\n\u003cimg src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/1017\/5745\/2662\/files\/4K-Cam-HD-Cam-comparison.jpg\" alt=\"\"\u003e\n\u003c\/figure\u003e\n\u003cfigure\u003e\n\u003cimg src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/1017\/5745\/2662\/files\/4k-cam-extension.png\" alt=\"\"\u003e\n\u003c\/figure\u003e\n\u003ch3\u003eSet Up and Stream\u003c\/h3\u003e\n\u003cp\u003eThe 4K Cam replaces the HD USB Camera on the BlueROV. It comes with the hardware needed to upgrade, but an \u003ca href=\"\/products\/ethswitch\"\u003eEthernet Switch\u003c\/a\u003e is required. We have a guide to walk you through the steps!\u003c\/p\u003e\n\u003cp\u003eThe camera’s \u003ca href=\"https:\/\/bluerobotics.com\/what-is-blueos\/\"\u003eBlueOS\u003c\/a\u003e extension handles the hardware setup, stream configuration, and the camera settings you are most likely to use. From the extension, you can adjust settings such as resolution, bitrate, image controls, water-color presets, and video stream configuration.\u003c\/p\u003e\n\u003cp\u003eOnce everything is set up, the camera is fully supported in \u003ca href=\"https:\/\/bluerobotics.com\/cockpit\/\"\u003eCockpit\u003c\/a\u003e, our customizable next-generation control station software. Cockpit allows you to assign zoom controls to your controller, adjust focus while piloting, trigger One-Push White Balance, access camera settings directly from the interface, and configure the layout around your mission.\u003c\/p\u003e\n\u003ch3\u003eThe Footage Club\u003c\/h3\u003e\n\u003cp\u003e Are you the next Jacques Cousteau or James Cameron? Join our 4K Cam Footage Club and share your best shots with us for a chance to be featured!\u003c\/p\u003e","brand":"Blue Robotics","offers":[{"title":"Default Title","offer_id":58746983481718,"sku":"BR-103829","price":750.0,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1017\/5745\/2662\/files\/BR-103829-4K-CAM_02.jpg?v=1789582345"},{"product_id":"barxt-extended-submersion-depth-pressure-sensors","title":"BarXT Extended Submersion Depth\/Pressure Sensors","description":"\u003cp\u003eThe BarXT pressure sensor series is designed for underwater applications where sensors need to remain submerged for extended periods without maintenance. They’re ideal for ROVs, AUVs, and other subsea instrumentation in long-term deployments where reliability is important.\u003c\/p\u003e\n\u003cp\u003eBarXT sensors use the M10 bulkhead penetrator form factor machined from 316 stainless steel, coated with black oxide to reduce galvanic corrosion, and feature a front cover that protects the sensing element from physical damage. BarXT is built to handle harsh marine environments and extended missions.\u003c\/p\u003e\n\u003cp\u003eThe BarXT line uses the Keller 4LD series sealed pressure and temperature sensor, and includes four models to cover a range of depths and resolutions:\u003c\/p\u003e\n\u003ctable\u003e\n\u003cthead\u003e\n\u003ctr\u003e\n\u003cth\u003eModel\u003c\/th\u003e\n\u003cth\u003eOperating Range\u003c\/th\u003e\n\u003cth\u003eApproximate Depth\u003c\/th\u003e\n\u003cth\u003eResolution\u003c\/th\u003e\n\u003c\/tr\u003e\n\u003c\/thead\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003eBar3XT\u003c\/td\u003e\n\u003ctd\u003e0–3 bar\u003c\/td\u003e\n\u003ctd\u003e20 m\u003c\/td\u003e\n\u003ctd\u003e0.091 mbar (0.9 mm)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eBar10XT\u003c\/td\u003e\n\u003ctd\u003e0–10 bar\u003c\/td\u003e\n\u003ctd\u003e100 m\u003c\/td\u003e\n\u003ctd\u003e0.31 mbar (3.12 mm)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eBar30XT\u003c\/td\u003e\n\u003ctd\u003e0–30 bar\u003c\/td\u003e\n\u003ctd\u003e300 m\u003c\/td\u003e\n\u003ctd\u003e0.92 mbar (9.36 mm)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eBar100XT\u003c\/td\u003e\n\u003ctd\u003e0–100 bar\u003c\/td\u003e\n\u003ctd\u003e1000 m\u003c\/td\u003e\n\u003ctd\u003e3 mbar (31 mm)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\u003ciframe src=\"https:\/\/www.youtube.com\/embed\/geI2UIC6IPM?feature=oembed\" allowfullscreen\u003e\u003c\/iframe\u003e\n\u003cfigure\u003e\n\u003cimg src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/1017\/5745\/2662\/files\/BARXT-VP-ITW.jpg\" alt=\"\"\u003e\n\u003c\/figure\u003e\n\u003ch3\u003ePerformance Under Pressure\u003c\/h3\u003e\n\u003cp\u003eAll BarXT models also measure temperature, accurate to ±2 °C. They communicate via I²C, operate on 3.3 V logic (with 5.5 V max power input), and come with a JST GH connector compatible with most flight controllers, like the \u003ca href=\"\/products\/navigator\"\u003eNavigator Flight Controller\u003c\/a\u003e and Pixhawk autopilot.\u003c\/p\u003e\n\u003cp\u003eThey are fully supported in ArduSub, and we provide \u003ca href=\"https:\/\/github.com\/bluerobotics\/BlueRobotics_KellerLD_Library\"\u003eArduino\u003c\/a\u003e and \u003ca href=\"https:\/\/github.com\/bluerobotics\/KellerLD-python\"\u003ePython\u003c\/a\u003e libraries for simple integration into your projects. The electrical schematic and board layout are also provided, so you can adapt the design to your own projects.\u003c\/p\u003e\n\u003cp\u003eIf you’re looking for a more budget-friendly option, the \u003ca href=\"\/products\/bar-depth-pressure-sensor\"\u003eBar series sensors\u003c\/a\u003e provide accurate depth and pressure for intermittent submersion applications. And if you need a temperature sensor with even more accuracy, try out the \u003ca href=\"\/products\/celsius-sensor-r1\"\u003eCelsius Temperature Sensor\u003c\/a\u003e.\u003c\/p\u003e","brand":"Blue Robotics","offers":[{"title":"Bar3XT - 0–3 bar (~20 m)","offer_id":58747048460662,"sku":"BR-103242-003","price":380.0,"currency_code":"EUR","in_stock":true},{"title":"Bar10XT - 0–10 bar (~100 m)","offer_id":58747048493430,"sku":"BR-103242-010","price":380.0,"currency_code":"EUR","in_stock":true},{"title":"Bar30XT - 0–30 bar (~300 m)","offer_id":58747048526198,"sku":"BR-103242-030","price":380.0,"currency_code":"EUR","in_stock":true},{"title":"Bar100XT - 0–100 bar (~1000 m)","offer_id":58747048558966,"sku":"BR-103242-100","price":380.0,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1017\/5745\/2662\/files\/BarXT-VP.jpg?v=1789582933"},{"product_id":"cam-usb-low-light-r1","title":"Low-Light HD USB Camera","description":"\u003cp\u003eThis Low-Light HD USB Camera is ideally suited to use underwater with excellent low-light performance, good color handling, and onboard video compression. A specially-chosen wide-angle, low distortion lens provides excellent picture quality on the ROV, and a built-in microphone* allows listening to sounds of the deep, and your vehicle.\u003c\/p\u003e\n\u003cp\u003eBased on the Sony IMX322\/323 sensor, this camera uses a large sensor (1\/2.9″) and a relatively low pixel count (2MP, 1080p), meaning that the physical pixel size is large to allow maximum light sensitivity. We’ve had this camera down at 300m depth, where we could see subtle bioluminescent creatures in the darkness!\u003c\/p\u003e\n\u003cp\u003eThe camera also has an onboard H.264 compression chip so that all of the video compression is done onboard and doesn’t place much load on the main computer. That also means that we’ll be able to support multiple cameras in the future for alternate views.\u003c\/p\u003e\n\u003cp\u003eThis camera is fully supported in ArduSub. Includes an 8″ USB cable with JST-PH connector.\u003c\/p\u003e\n\u003cp\u003eThe camera’s PCB is 32 x 32mm and works well with our \u003ca href=\"\/products\/camera-tilt-mount\"\u003eCamera Tilt System\u003c\/a\u003e.\u003c\/p\u003e\n\u003cfigure\u003e\n\u003cimg src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/1017\/5745\/2662\/files\/Biolum.gif\" alt=\"\"\u003e\u003cfigcaption\u003eBioluminescent invertebrates at 120m in California\u003c\/figcaption\u003e\n\u003c\/figure\u003e","brand":"Blue Robotics","offers":[{"title":"Default Title","offer_id":58747052589430,"sku":"BR-100126","price":120.0,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1017\/5745\/2662\/files\/cam-1-2.png?v=1789582966"},{"product_id":"camera-tilt-mount","title":"Camera Tilt System","description":"\u003cp\u003eThe Camera Tilt System is a tilting camera mount which works seamlessly with the \u003ca href=\"\/products\/wte-locking-tube-r1-vp\"\u003eWatertight Enclosure for ROV\/AUV (4″ Series)\u003c\/a\u003e and the \u003ca href=\"\/products\/wte4-etray-r1\"\u003eElectronics Tray (4″ Series)\u003c\/a\u003e. The tilting servo is the high-quality digital HS-5055MG servo with metal gears. The camera mounts are compatible with our \u003ca href=\"\/products\/cam-usb-low-light-r1\"\u003eLow-Light HD USB Camera\u003c\/a\u003e. We have also made the 3D CAD files freely available so that you can modify them to fit your camera or servo!\u003c\/p\u003e\n\u003cp\u003eThe Camera Tilt System has proven itself as a stable, robust camera tilting system on the BlueROV2.\u003c\/p\u003e","brand":"Blue Robotics","offers":[{"title":"Default Title","offer_id":58747052622198,"sku":"BR-101856","price":62.0,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1017\/5745\/2662\/files\/IMG_1677_ffd0ba5b-4dee-413d-b061-1b620d5f124c.png?v=1789582968"},{"product_id":"camtilt-mount-usb-32mm-r1","title":"Mount for USB Camera","description":"\u003cp\u003eThis camera mount holds the Low-Light HD USB Camera on the Camera Tilt System. You can buy this part separately from the \u003ca href=\"\/products\/camera-tilt-mount\"\u003eCamera Tilt System\u003c\/a\u003e if you want to change camera types.\u003c\/p\u003e","brand":"Blue Robotics","offers":[{"title":"Default Title","offer_id":58747052654966,"sku":"BR-100254","price":4.0,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1017\/5745\/2662\/files\/IMG_1642.png?v=1789582969"},{"product_id":"celsius-sensor-pcb-r1","title":"PCB for Celsius Fast-Response, ±0.1°C Temperature Sensor","description":"\u003cp\u003eThe Celsius temperature sensor is a fast-response, high-accuracy temperature sensor. We have a \u003ca href=\"\/products\/celsius-sensor-r1\"\u003esealed and protected version available here\u003c\/a\u003e, but this unsealed board-level version is great for integrating directly into projects and for use in dry environments.\u003c\/p\u003e\n\u003cp\u003eThe sensor is the Measurement Specialties TSYS01, which is accurate to ±0.1°C and communicates over I\u003csup\u003e2\u003c\/sup\u003eC. It operates on 3.3V I\u003csup\u003e2\u003c\/sup\u003eC voltage but can accept power input up to 5.5V. It includes four solder pads for ground, 3.3V-5.5V power, and 3.3V I\u003csup\u003e2\u003c\/sup\u003eC lines.\u003c\/p\u003e\n\u003cp\u003eThe TSYS01 sensor itself has a fast time response and we designed the whole package to maintain that speed.\u003c\/p\u003e\n\u003cp\u003eThe electrical schematic and board layout are open-source and the design files are available in the Technical Details tab. Feel free to adapt for your own needs.\u003c\/p\u003e","brand":"Blue Robotics","offers":[{"title":"Default Title","offer_id":58747052720502,"sku":"BR-100263","price":40.0,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1017\/5745\/2662\/files\/celcius-temp-r4-1.png?v=1789582968"},{"product_id":"celsius-sensor-r1","title":"Celsius Fast-Response, ±0.1°C Temperature Sensor (I2C)","description":"\u003cp\u003eThe Celsius temperature sensor is a fast-response, high-accuracy temperature sensor that is protected by an aluminum cage, and sealed from the water when installed on a watertight enclosure. Use it to make depth\/temperature profiles, surface temperature profiles, and accurate measurements in any fluid.\u003c\/p\u003e\n\u003cp\u003eThe sensor is the Measurement Specialties TSYS01, which is accurate to ±0.1°C and communicates over I\u003csup\u003e2\u003c\/sup\u003eC. It comes standard with a JST GH connector and compatible with most \u003ca href=\"http:\/\/dronecode.org\"\u003eDroneCode\u003c\/a\u003e compatible boards including the APM2.6, PixHawk, and others.\u003c\/p\u003e\n\u003cp\u003eThe TSYS01 sensor itself has a fast time response and we designed the whole package to maintain that speed to allow accurate temperature profile measurements even while descending\/ascending quickly. The Celsius sensor has a response time constant of 1 second (with 0.5 m\/s flow) and 2 seconds (in still water).\u003c\/p\u003e\n\u003cp\u003eAn anodized aluminum cage around the sensor protects it from damage. The body of the sensor is designed around the cable penetrator design and is compatible with all of the watertight enclosures.\u003c\/p\u003e\n\u003cp\u003eThe electrical schematic and board layout are open-source and the design files are available in the Technical Details tab. Feel free to adapt for your own needs.\u003c\/p\u003e","brand":"Blue Robotics","offers":[{"title":"Default Title","offer_id":58747052753270,"sku":"BR-100317","price":76.0,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1017\/5745\/2662\/files\/CELSIUS-SENSOR-R2-RP.jpg?v=1789582968"},{"product_id":"level-converter-r1","title":"I\u003csup\u003e2\u003c\/sup\u003eC Level Converter","description":"\u003cp\u003eThe I\u003csup\u003e2\u003c\/sup\u003eC Level Converter allows you the run 3.3V logic sensors like the Bar30 or \u003ca href=\"\/products\/celsius-sensor-r1\"\u003eCelsius\u003c\/a\u003e and other accessories off of a 5V logic device like the Arduino Uno!\u003c\/p\u003e\n\u003cp\u003eA selectable solder jumper lets you run 5V or 3.3V power to your sensor, independent of the 3.3V I\u003csup\u003e2\u003c\/sup\u003eC logic. Built in four-pin DF13, JST GH, and 0.1″ header pin connectors provide maximum flexibility and ease of use.\u003c\/p\u003e","brand":"Blue Robotics","offers":[{"title":"Default Title","offer_id":58747055767926,"sku":"BR-100087","price":30.0,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1017\/5745\/2662\/files\/level-converter-1.png?v=1789582989"},{"product_id":"marinesitu-c3-stereo-camera","title":"MarineSitu C3 Stereo Camera","description":"\u003cp\u003eA stereo camera works a lot like human eyes. It uses two lenses to capture images from slightly different perspectives, then compares the small differences between those images to calculate depth and distance, creating 3D perception. Because the cameras are separated by a fixed distance, called the baseline, scale can be measured from the imagery. That makes stereo cameras a powerful tool for applications like autonomous vehicle navigation, robotic exploration, environmental monitoring, distance and size measurement, and 3D mapping and photogrammetry.\u003c\/p\u003e\n\u003cp\u003eThe \u003ca href=\"https:\/\/www.marinesitu.com\/\"\u003eMarineSitu\u003c\/a\u003e C3 brings those stereo vision capabilities underwater. It’s built around the Luxonis OAK-D stereo camera, housed in a durable POM plastic enclosure with a quartz lens and rated to 1000 meters depth. Each unit is individually calibrated for underwater operation to ensure accurate depth and scale in marine environments.\u003c\/p\u003e\n\u003ciframe src=\"https:\/\/www.youtube.com\/embed\/E3zFd6QJozw?feature=oembed\" allowfullscreen\u003e\u003c\/iframe\u003e\n\u003cfigure\u003e\n\u003cimg src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/1017\/5745\/2662\/files\/marinesitu-c3-itw-169.jpg\" alt=\"\"\u003e\n\u003c\/figure\u003e\n\u003ch3\u003ePerceive Depth. At Depth.\u003c\/h3\u003e\n\u003cp\u003eThe C3 uses two monochrome stereo cameras spaced 7.5 centimeters apart to capture depth data, along with a 12-megapixel center color camera for high-resolution imagery. Wide field of view stereo sensors with global shutters deliver sharp, stable images even when the vehicle or scene is in motion.\u003c\/p\u003e\n\u003cp\u003eThe MarineSitu C3 comes with a preinstalled \u003ca href=\"\/products\/wlp-vp\"\u003eWetLink Penetrator\u003c\/a\u003e and a stainless steel mounting bracket with hardware for easy installation on the BlueROV2. It connects via Ethernet, so you’ll need an \u003ca href=\"\/products\/ethswitch\"\u003eEthernet Switch\u003c\/a\u003e for integration. Check out the full \u003ca href=\"https:\/\/bluerobotics.com\/learn\/integrating-the-marinesitu-c3-stereo-camera-on-the-bluerov2\/\"\u003eintegration guide\u003c\/a\u003e for all the details.\u003c\/p\u003e\n\u003cp\u003eOnce connected, use the \u003ca href=\"https:\/\/madrona.marinesitu.io\/\"\u003eMadrona BlueOS extension\u003c\/a\u003e to configure video streams and image capture, then use the free \u003ca href=\"https:\/\/c3-data-review-app-157680.gitlab.io\/\"\u003eC3 Data Review App\u003c\/a\u003e to review, annotate, and measure captured images after your dive.\u003c\/p\u003e\n\u003cp\u003eFor developers, the C3 is also compatible with the \u003ca href=\"https:\/\/docs.luxonis.com\/software-v3\/?v=OAK\"\u003eLuxonis OAK software ecosystem\u003c\/a\u003e for advanced computer vision applications and ROS integration.\u003c\/p\u003e","brand":"MarineSitu","offers":[{"title":"Default Title","offer_id":58747056193910,"sku":"BR-105923","price":3950.0,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1017\/5745\/2662\/files\/BR-105923-marinesitu-c3-1.jpg?v=1789582993"},{"product_id":"pcb-for-bar-depth-pressure-sensors","title":"PCB for Bar Depth\/Pressure Sensors","description":"\u003cp\u003eThese are the board-level versions of our \u003ca href=\"\/products\/bar-depth-pressure-sensor\"\u003eBar Depth and Pressure Sensors\u003c\/a\u003e for tight integration into projects.\u003c\/p\u003e\n\u003cp\u003eThere are two models:\u003c\/p\u003e\n\u003cp\u003eThe Bar02 is a low-pressure, ultra-high resolution sensor using the Measurement Specialties MS5837-02BA. It measures up to 2 bar (about 10 meters water depth) with a depth resolution of just 0.16 mm and can also measure in-air altitude with 13 cm resolution. This makes it ideal for shallow-water devices where a high level of resolution is required. It includes a temperature sensor accurate to ±2 °C and is supported in ArduSub 4.7 and later.\u003c\/p\u003e\n\u003cp\u003eThe Bar30 is a high-pressure sensor using the Measurement Specialties MS5837-30BA. It measures up to 30 bar (about 300 meters water depth) with a depth resolution of 2 mm, making it a great choice for deep-water ROVs and general underwater instrumentation. The built-in temperature sensor has ±4 °C accuracy, and is supported by ArduSub and other ArduPilot firmware.\u003c\/p\u003e\n\u003cp\u003eBoth communicate via I²C and operate on 3.3 V logic (with 5.5 V max power input). The PCB includes four solder pads for ground, 2.5–5.5 V power, and 3.3 V I\u003csup\u003e2\u003c\/sup\u003eC connections.\u003c\/p\u003e","brand":"Blue Robotics","offers":[{"title":"Bar02","offer_id":58747058291062,"sku":"BR-100999","price":42.0,"currency_code":"EUR","in_stock":true},{"title":"Bar30","offer_id":58747058323830,"sku":"BR-100747","price":50.0,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1017\/5745\/2662\/files\/BAR-PCB-VP-1.jpg?v=1789583004"},{"product_id":"sos-leak-sensor","title":"SOS Leak Sensor","description":"\u003cp\u003eThe SOS Leak Sensor can detect water leaking into an improperly sealed Watertight Enclosure quickly and reliably, before any major damage can occur! Though we are confident in the quality of our Watertight Enclosures and a leak is unlikely, the SOS Leak Sensor will give you additional peace of mind that your electronics are safe.\u003c\/p\u003e\n\u003cp\u003eFour re-usable sponge tipped probes with an adhesive backing let you monitor all corners of a Watertight enclosure, from the penetrators to the front and rear flanges. When a leak is detected, the signal is pulled high to VCC and bright red LED shines, making it easy to integrate with an Arduino, Raspberry Pi, Pixhawk, and many other 3.3v or 5v devices. The \u003ca href=\"http:\/\/ardusub.com\/\"\u003eArduSub\u003c\/a\u003e firmware supports the SOS Leak Sensor on the Pixhawk by default.\u003c\/p\u003e","brand":"Blue Robotics","offers":[{"title":"Default Title","offer_id":58747059601782,"sku":"BR-101072","price":35.0,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1017\/5745\/2662\/files\/IMG_8229.png?v=1789583014"},{"product_id":"sos-probe-tips","title":"SOS Probe Tips","description":"\u003cp\u003eThese extra probe tips for your \u003ca href=\"\/products\/sos-leak-sensor\"\u003eSOS Leak Sensor\u003c\/a\u003e probes let you replace old and worn probes tips that have been exposed to water multiple times. Simply pull off the old tip, and push on a fresh one with a dab of glue to keep it secure.\u003c\/p\u003e\n\u003cp\u003eEach probe tip is adhesive backed.\u003c\/p\u003e","brand":"Blue Robotics","offers":[{"title":"Default Title","offer_id":58747059700086,"sku":"BR-100271","price":8.0,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1017\/5745\/2662\/files\/BR-100271-SOS-PROBE-TIPS-scaled.jpg?v=1789583016"},{"product_id":"sos-probes","title":"SOS Probes","description":"\u003cp\u003eThese extra probes for your \u003ca href=\"\/products\/sos-leak-sensor\"\u003eSOS Leak Sensor\u003c\/a\u003e let you get to those hard to reach places in your watertight enclosure! You can choose extra 6″ or 12″ probes for your leak detection setup. Each probe can be re-used a number of times if dried out and re-compressed, but once the tip degrades you can also get replacement \u003ca href=\"\/products\/sos-probe-tips\"\u003eSOS Probe Tips\u003c\/a\u003e.\u003c\/p\u003e\n\u003cp\u003eEach probe comes with an adhesive backed tip.\u003c\/p\u003e","brand":"Blue Robotics","offers":[{"title":"6\" Single Tip Probe","offer_id":58747059732854,"sku":"BR-100954","price":3.0,"currency_code":"EUR","in_stock":true},{"title":"12\" Single Tip Probe","offer_id":58747059765622,"sku":"BR-100487","price":3.0,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1017\/5745\/2662\/files\/BR-100954-SOS-PROBE-01-1-scaled.jpg?v=1789583016"},{"product_id":"3-subsea-camera-system-600m-rov-auv-with-poe","title":"3 Subsea IP Camera Ethernet System (600m) ROV\/AUV with POE","description":"\u003cp\u003eReplace your single IP-camera with this 3-camera system. This bundle features three exploreHD Heavy cameras with Cobalt and one micro SVC module, offering a Power over Ethernet plug-and-play solution. Equipped with our DWE OS software, each camera supports individual UDP streaming and allows for easy adjustment of bitrate, exposure, and various essential camera controls. Depth rated to 600 meters\u003c\/p\u003e","brand":"DWE","offers":[{"title":"Default Title","offer_id":58747330986358,"sku":"DWE-3IPCES","price":2990.0,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1017\/5745\/2662\/files\/micro-subsea-vision-computer-multi-camera-system.jpg?v=1789586022"},{"product_id":"explore3d","title":"explore3D (1000m - 11000m)","description":"\u003cp\u003eIntroducing the \u003cb\u003eexplore3D\u003c\/b\u003e, the world's first modular real-time underwater stereo camera.\u003c\/p\u003e\n\u003cp\u003eDesigned from the ground up for both ROV and AUV integration, its compact and lightweight form factor allows for seamless installation on virtually any vehicle. You no longer need to design a custom skid or allocate additional payload space; the explore3D's modular design lets you easily mount it wherever you need it, freeing up valuable space and simplifying your setup.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eKey Features:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eReal-Time, Synchronized Capture: \u003c\/strong\u003eOur PrecisionSync technology ensures perfectly synchronized video at 60 FPS, providing superior data for stereo vision applications. This is made possible by our proprietary one-wire frame sync, which adds no additional connectors. This innovation makes the explore3D the only fully modular stereo setup on the market, allowing customers to easily change the baseline length and integrate it onto any vehicle design.\u003cbr\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003ePrecise Strobe Light Control: \u003c\/strong\u003eOur system offers precise, frame-synced LED strobe control. By pulsing the lights only during exposure, it drastically cuts power consumption, allowing for the integration of exceptionally brighter strobes while eliminating motion blur. Works seamlessly with our aquaLUX or ultraLUX lighting systems. \u003cbr\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eDistortion-Free Aquagon® Optics: \u003c\/strong\u003eUnlike standard flat or dome ports that introduce warping and chromatic aberrations, our proprietary Aquagon Optics are custom-engineered to deliver crystal-clear, distortion-free images directly from the source. The result is the highest fidelity data possible for your stereo vision applications.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003ePlug-and-Play Simplicity: \u003c\/strong\u003eThe explore3D is UVC compliant, offering a true plug-and-play experience. By connecting directly to any on-board computer, it eliminates the need for an additional system, saving power, space, and complexity. This makes it an ideal, low-power solution for AUV integration.\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eUltra-Low Latency:\u003c\/b\u003e By eliminating the bottlenecks of additional computers and complex processing chains, our system delivers a straightforward data stream with a latency of less than 60ms. This ensures you have access to real-time, high-speed data for time-critical operations.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eBuilt for Depth: \u003c\/strong\u003eChoose the model that fits your needs with impressive water-depth ratings of 1,000\/6,000\/11,000+ meters.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003eHow It Works:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eThe explore3D is built around two high-performance stellarHD cameras on a precision-calibrated bracket. Equipped with a modern global shutter sensor and a proprietary PCB, this system is engineered to capture the most accurate and reliable synchronized video underwater.\u003c\/p\u003e\n\u003cp\u003eReady to elevate your 3D data capture? The explore3D is the perfect choice for professional subsea applications.\u003c\/p\u003e\n\u003cp\u003eFor custom configurations and detailed inquiries, please contact our sales team at us.\u003c\/p\u003e","brand":"DWE","offers":[{"title":"600m - Cobalt \/ OEM Calibration \/ Camera Only","offer_id":58747332460918,"sku":"DWE-E3D-C-ECF-C","price":10000.0,"currency_code":"EUR","in_stock":true},{"title":"600m - Cobalt \/ OEM Calibration \/ SVC Pro\/Camera","offer_id":58747332493686,"sku":"DWE-E3D-C-ECF-SK","price":22500.0,"currency_code":"EUR","in_stock":true},{"title":"600m - Cobalt \/ OEM Calibration \/ Camera\/SVC Pro\/Lights","offer_id":58747332526454,"sku":"DWE-E3D-C-ECF-CK","price":25000.0,"currency_code":"EUR","in_stock":true},{"title":"600m - Cobalt \/ Hardware Only \/ Camera Only","offer_id":58747332559222,"sku":"DWE-E3D-C-H","price":6500.0,"currency_code":"EUR","in_stock":true},{"title":"2000m - SubConn \/ OEM Calibration \/ Camera Only","offer_id":58747332591990,"sku":"DWE-E3D-SC2K-ECF-C","price":15000.0,"currency_code":"EUR","in_stock":true},{"title":"2000m - SubConn \/ OEM Calibration \/ SVC Pro\/Camera","offer_id":58747332624758,"sku":"DWE-E3D-SC2K-ECF-SK","price":35000.0,"currency_code":"EUR","in_stock":true},{"title":"2000m - SubConn \/ OEM Calibration \/ Camera\/SVC Pro\/Lights","offer_id":58747332657526,"sku":"DWE-E3D-SC2K-ECF-CK","price":37500.0,"currency_code":"EUR","in_stock":true},{"title":"2000m - SubConn \/ Hardware Only \/ Camera Only","offer_id":58747332690294,"sku":"DWE-E3D-SC2K-H","price":11500.0,"currency_code":"EUR","in_stock":true},{"title":"6000m - SubConn \/ OEM Calibration \/ Camera Only","offer_id":58747332723062,"sku":"DWE-E3D-SC6K-ECF-C","price":27000.0,"currency_code":"EUR","in_stock":true},{"title":"6000m - SubConn \/ OEM Calibration \/ SVC Pro\/Camera","offer_id":58747332755830,"sku":"DWE-E3D-SC6K-ECF-SK","price":55000.0,"currency_code":"EUR","in_stock":true},{"title":"6000m - SubConn \/ OEM Calibration \/ Camera\/SVC Pro\/Lights","offer_id":58747332788598,"sku":"DWE-E3D-SC6K-ECF-CK","price":65000.0,"currency_code":"EUR","in_stock":true},{"title":"6000m - SubConn \/ Hardware Only \/ Camera Only","offer_id":58747332821366,"sku":"DWE-E3D-SC6K-H","price":20000.0,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1017\/5745\/2662\/files\/explore3D.jpg?v=1789586028"},{"product_id":"explorehd-bracket","title":"exploreHD Aluminum Mounting Bracket (Screws Included)","description":"\u003cp\u003eEnsure a secure fit for your underwater optics with our hard-anodized mounting solution.\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cp\u003e\u003cb\u003eSupported Cameras:\u003c\/b\u003e exploreHD, stellarHD, and Heavy (non-Aquagon variants) \u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cp\u003e\u003cb\u003eMaterial:\u003c\/b\u003e Hard-Anodized 6061-T6 Aluminum.\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cp\u003e\u003cb\u003eHardware:\u003c\/b\u003e M3 threaded bottom base for easy installation.\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cp\u003e\u003cb\u003eApplications:\u003c\/b\u003e Ideal for ROVs, AUVs, and marine robotics.\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cp\u003e\u003cb\u003eNote:\u003c\/b\u003e Not compatible with Aquagon or Pro models. Please verify camera size before ordering.\u003c\/p\u003e\n\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"DWE","offers":[{"title":"Standard (exploreHD)","offer_id":58747332919670,"sku":"DWE-EHDMB-1","price":15.0,"currency_code":"EUR","in_stock":true},{"title":"Large (Heavy and stellarHD)","offer_id":58747332952438,"sku":"DWE-EHDMB-2","price":15.0,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1017\/5745\/2662\/files\/exploreHD_metal_bracket.jpg?v=1789586028"},{"product_id":"explorehd-challenger","title":"exploreHD Challenger (11000m)","description":"\u003cp\u003eIntroducing the exploreHD Challenger, a cutting-edge subsea camera engineered to reach the full ocean depth of 11,000 meters. Building on the innovative design of the highly acclaimed exploreHD Pro, the exploreHD Challenger takes its predecessor's capabilities to new heights with unmatched depth resistance. Each camera is rigorously cycle-tested at extreme depths before shipment, ensuring resilience against the intense pressures found at 11 kilometers. A certificate of testing is included with each order to guarantee performance.\u003c\/p\u003e\n\u003cp\u003eThe exploreHD Challenger features a specially-formed sapphire dome. This element is cut from a highly refined sapphire boule with exceptional structural homogeneity – ensuring that this port is exceptionally strong.\u003c\/p\u003e\n\u003cp\u003ePrecision-crafted from titanium and coated with Diamond-Like Carbon (DLC), the exploreHD Challenger marries durability with compact design and superior image quality, making it perfect for diverse subsea robotic and machine vision applications.\u003c\/p\u003e\n\u003cp\u003eDespite its small form factor and impressive depth capabilities, the camera maintains exceptional image quality and functionality. It utilizes the advanced backside illuminated sensor found in the exploreHD Heavy, which performs superbly in low light conditions and reduces noise, delivering sharp, high-resolution images.\u003c\/p\u003e\n\u003cp\u003eTailored for complex computer vision tasks, the exploreHD Challenger revolutionizes the functionality of both operator-controlled and autonomous underwater robots. It integrates seamlessly with our state-of-the-art DWE OS software, pushing the boundaries of underwater exploration.\u003c\/p\u003e","brand":"DWE","offers":[{"title":"Aquagon Lens™ Non-Distorting","offer_id":58747332985206,"sku":"DWE-EHDCUSB-AL","price":8300.0,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1017\/5745\/2662\/files\/exploreHD_Challenger_ProdPic_20221b27-f42d-4198-b0cc-5b3b623a72c8.jpg?v=1789586030"},{"product_id":"explorehd-heavy","title":"exploreHD Heavy (600m\/1000m)","description":"\u003cp\u003e\u003cstrong\u003eStandard Cable Length: 1 meter (for longer cable length, contact us for a quote)\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eThe exploreHD Heavy is the ultimate upgrade from its predecessor, packed with groundbreaking features that make it a true revolution in underwater vision. Boasting a brand new backside illuminated (BSI) sensor that uses Sony's STARVIS technology, this camera offers unmatched low light performance and dynamic range. The new military-grade aluminum alloy casing provides incredible resistance to galvanic corrosion, while the sapphire crystal front element adds durability and scratch resistance. This, in combination with our patent pending technology, offers an extreme depth rating of 1000 meters.\u003cbr\u003e\u003cbr\u003eThe exploreHD Heavy is designed to take on advanced computer vision applications, bridging the gap between autonomy and underwater robots. And when paired with our DWE OS software, the possibilities are endless!\u003cbr\u003e\u003cbr\u003eBut that's not all - the exploreHD Heavy and DWE OS software work seamlessly together, allowing for advanced multi-stream capabilities of up to 7 cameras at the same time with low latency and bandwidth. Say goodbye to limitations and hello to endless possibilities!\u003c\/p\u003e","brand":"DWE","offers":[{"title":"WetLink \/ Standard Fisheye Lens","offer_id":58747333050742,"sku":"DWE-EHDHUSB-WL-SL","price":650.0,"currency_code":"EUR","in_stock":true},{"title":"WetLink \/ Aquagon™ Lens","offer_id":58747333083510,"sku":"DWE-EHDHUSB-WL-AL","price":2350.0,"currency_code":"EUR","in_stock":true},{"title":"Cobalt \/ Standard Fisheye Lens","offer_id":58747333116278,"sku":"DWE-EHDHUSB-C-SL","price":790.0,"currency_code":"EUR","in_stock":true},{"title":"Cobalt \/ Aquagon™ Lens","offer_id":58747333149046,"sku":"DWE-EHDHUSB-C-AL","price":2750.0,"currency_code":"EUR","in_stock":true},{"title":"SubConn \/ Standard Fisheye Lens","offer_id":58747333181814,"sku":"DWE-EHDHUSB-SC-SL","price":950.0,"currency_code":"EUR","in_stock":true},{"title":"SubConn \/ Aquagon™ Lens","offer_id":58747333214582,"sku":"DWE-EHDHUSB-SC-AL","price":2950.0,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1017\/5745\/2662\/files\/P1069999-Recovered.jpg?v=1789586031"},{"product_id":"explorehd-pro","title":"exploreHD Pro (6000m)","description":"\u003cp\u003eIntroducing the exploreHD Pro, our most advanced general vision camera with an exceptional depth rating of 6000 meters. This groundbreaking camera empowers you to explore depths previously inaccessible by most. Precision Machined from aluminum and thoroughly hard-anodized Type III, the exploreHD Pro offers durability without compromising on size and high image quality. Its compact form factor opens up a wide range of applications for subsea robotics and machine vision requirements.\u003c\/p\u003e\n\u003cp\u003eWe understand the importance of maintaining high image quality and capabilities, even with a compact form factor and impressive depth rating. That's why the exploreHD Pro features the same backside illuminated sensor found in the exploreHD Heavy. This sensor delivers exceptional low light performance, while reducing noise for high resolution imaging.\u003c\/p\u003e\n\u003cp\u003eThe exploreHD Pro is specifically designed to tackle advanced computer vision applications, bridging the gap between operator-controlled and autonomous underwater robots. When combined with our cutting-edge DWE OS software, the potential for exploration becomes boundless. Building upon the success of our popular exploreHD Controls, this software offers a multitude of new features such as bitrate control, brightness, contrast, exposure, backlight compensation, TrueColor, and more!\u003c\/p\u003e","brand":"DWE","offers":[{"title":"Aquagon Lens™ Non-Distorting","offer_id":58747333247350,"sku":"DWE-EHDPUSB-AL","price":4500.0,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1017\/5745\/2662\/files\/exploreHD_Pro_ProdPic.jpg?v=1789586032"},{"product_id":"explorehd","title":"exploreHD (400m)","description":"\u003cp\u003e\u003cstrong\u003eStandard Cable Length: 1 meter (for longer cable length, contact us for a quote)\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eThis patented, UVC-compliant camera is the first to feature HD USB output while achieving a waterproof rating of IP69K. Equipped with a modern Sony sensor and a proprietary 4-layer PCB, you will be able to see in low light conditions like never before.\u003c\/p\u003e\n\u003cp\u003eThanks to careful tuning and AI image processing, exploreHDs have exceptional color fidelity, producing pleasing, natural images. With integrated H.264 compression technology and our open-source camera driver, you can stream up to 7 cameras simultaneously without major quality loss or latency. You can even stream an unlimited number of cameras together, provided that the bitrate is appropriately reduced.\u003c\/p\u003e\n\u003cp\u003eFurthermore, due to its UVC compliant nature, the exploreHD is the first plug and play machine vision capable subsea camera. This makes the exploreHD the perfect choice for anyone looking to make a truly modern multi-cam underwater setup.\u003c\/p\u003e","brand":"DWE","offers":[{"title":"Epoxy Potted \/ JST Crimps + USB Adapter (No Soldering Required) \/ 1 Meter","offer_id":58747334787446,"sku":"DWE-EHDUSB-EP","price":300.0,"currency_code":"EUR","in_stock":true},{"title":"Epoxy Potted \/ JST Crimps + USB Adapter (No Soldering Required) \/ 5 Meter","offer_id":58747334820214,"sku":"DWE-EHDUSB-EP-5M","price":350.0,"currency_code":"EUR","in_stock":true},{"title":"WetLink Penetrator \/ JST Crimps + USB Adapter (No Soldering Required) \/ 1 Meter","offer_id":58747334852982,"sku":"DWE-EHDUSB-WL","price":325.0,"currency_code":"EUR","in_stock":true},{"title":"WetLink Penetrator \/ JST Crimps + USB Adapter (No Soldering Required) \/ 5 Meter","offer_id":58747334885750,"sku":"DWE-EHDUSB-WL-5M","price":375.0,"currency_code":"EUR","in_stock":true},{"title":"Cobalt Penetrator \/ Cobalt 6-Pin with Simple Penetrator (USB Shielded Cable) \/ 1 Meter","offer_id":58747334918518,"sku":"DWE-EHDUSB-C","price":420.0,"currency_code":"EUR","in_stock":true},{"title":"Cobalt Penetrator \/ Cobalt 6-Pin with Simple Penetrator (USB Shielded Cable) \/ 5 Meter","offer_id":58747334951286,"sku":"DWE-EHDUSB-C-5M","price":430.0,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1017\/5745\/2662\/files\/exploreHD_Main_Picture_585ccd2f-67ad-419b-b43e-c9e3b67d5f28.jpg?v=1789586033"},{"product_id":"stellarhd-challenger","title":"stellarHD Challenger (11000m)","description":"\u003cp\u003e\u003cstrong\u003eModel\/Part Number: DWE-SHDCUSBR1\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eIntroducing the stellarHD Challenger, a cutting-edge subsea camera engineered to reach the full ocean depth of 11,000 meters. Building on the innovative design of the highly acclaimed stellarHD Pro, the stellarHD Challenger takes its predecessor's capabilities to new heights with unmatched depth resistance. Each camera is rigorously cycle-tested at extreme depths before shipment, ensuring resilience against the intense pressures found at 11 kilometers. A certificate of testing is included with each order to guarantee performance.\u003c\/p\u003e\n\u003cp\u003eThe stellarHD Challenger features a specially-formed sapphire dome. This element is cut from a highly refined sapphire boule with exceptional structural homogeneity – ensuring that this port is exceptionally strong.\u003c\/p\u003e\n\u003cp\u003ePrecision-crafted from titanium and coated with Diamond-Like Carbon (DLC), the stellarHD Challenger marries durability with compact design and superior image quality, making it perfect for diverse subsea robotic and machine vision applications.\u003c\/p\u003e\n\u003cp\u003eDespite its small form factor and impressive depth capabilities, the camera maintains exceptional image quality and functionality. It utilizes the advanced backside illuminated sensor found in the stellarHD, which performs superbly in low light conditions and reduces noise, delivering sharp, high-resolution images.\u003c\/p\u003e\n\u003cp\u003eTailored for complex computer vision tasks, the stellarHD Challenger revolutionizes the functionality of both operator-controlled and autonomous underwater robots. It integrates seamlessly with our state-of-the-art DWE OS software, pushing the boundaries of underwater exploration. Enhancing the already popular exploreHD Controls, the software now boasts new features such as bitrate control, adjustable brightness, contrast, exposure settings, backlight compensation, and TrueColor technology, among others!\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eFit For\u003cbr\u003e\u003c\/strong\u003eRemotely Operated Vehicles (ROVs)Autonomous Underwater Vehicles (AUVs)\u003cbr\u003eAutonomous Surface Vehicles (ASVs)\u003cbr\u003e...and more! \u003c\/p\u003e","brand":"DWE","offers":[{"title":"Aquagon Lens™ Non-Distorting","offer_id":58747336720758,"sku":"DWE-SHDCUSB-AL","price":8500.0,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1017\/5745\/2662\/files\/exploreHD_Challenger_Base.jpg?v=1789586038"},{"product_id":"stellarhd-pro","title":"stellarHD Pro (6000m)","description":"\u003cp\u003e3Introducing the world's first patent-pending UVC camera that boasts a 2MP HD Global Shutter sensor all through a USB output while featuring external Frame-Sync capability with millisecond-accuracy. All of these features in a familiar easy-to-use package with an impressive 6000 meter water-depth rating.\u003c\/p\u003e\n\u003cp\u003eEquipped with a modern Global Shutter sensor and a proprietary PCB, you will be able to capture synchronized video like never before. Using our frame-syncing technology, chain a multitude of cameras to capture simultaneously-synchronized video up to 60 FPS.\u003c\/p\u003e\n\u003cp\u003eChoose between color or monochrome sensor. If color is not a necessity, monochrome sensor is recommended as it will offer better sharpness and low light performance with less bandwidth.\u003c\/p\u003e\n\u003cp\u003eThis camera offers versatile frame-syncing configurations for any project scale. Choose between a 1-leader\/multiple-follower setup to have one camera control the synchronization of others, perfect for multi-angle captures. Alternatively, connect all cameras to an external clock signal for large-scale, complex operations. This flexibility ensures precise, simultaneous video capturing, making the stellarHD Pro ideal for advanced multi-camera underwater setups.\u003c\/p\u003e\n\u003cp\u003eFurthermore, due to its UVC compliant nature, the stellarHD Pro is the first plug and play machine vision capable subsea camera. This makes the stellarHD Pro the perfect choice for anyone looking to make a truly modern multi-cam underwater setup.\u003c\/p\u003e","brand":"DWE","offers":[{"title":"Aquagon Lens™ \/ Color Sensor","offer_id":58747336753526,"sku":"DWE-SHDPUSB-AL-CS","price":6500.0,"currency_code":"EUR","in_stock":true},{"title":"Aquagon Lens™ \/ Monochrome","offer_id":58747336786294,"sku":"DWE-SHDPUSB-AL-MS","price":6500.0,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1017\/5745\/2662\/files\/exploreHD_Pro_ProdPic_f47a3273-818d-4869-9c1a-394404a578e8.jpg?v=1789586040"},{"product_id":"stellarhd","title":"stellarHD (600m\/1000m)","description":"\u003cp\u003eIntroducing our patented UVC camera that boasts a 2MP HD Global Shutter sensor all through a USB output while featuring external Frame-Sync capability with millisecond-accuracy. All of these features in a familiar easy-to-use package with an impressive 1000 meter water-depth rating.\u003c\/p\u003e\n\u003cp\u003eEquipped with a modern Global Shutter sensor and a proprietary PCB, you will be able to capture synchronized video like never before. Using our frame-syncing technology, chain a multitude of cameras to capture simultaneously-synchronized video up to 60 FPS.\u003c\/p\u003e\n\u003cp\u003eChoose between color or monochrome sensor. If color is not a necessity, monochrome sensor is recommended as it will offer better sharpness and low light performance with less bandwidth.\u003c\/p\u003e\n\u003cp\u003eThis camera offers versatile frame-syncing configurations for any project scale. Choose between a 1-leader\/multiple-follower setup to have one camera control the synchronization of others, perfect for multi-angle captures. Alternatively, connect all cameras to an external clock signal for large-scale, complex operations. This flexibility ensures precise, simultaneous video capturing, making the stellarHD ideal for advanced multi-camera underwater setups.\u003c\/p\u003e\n\u003cp\u003eFurthermore, due to its UVC compliant nature, the stellarHD is the first plug and play machine vision capable subsea camera. This makes the stellarHD the perfect choice for anyone looking to make a truly modern multi-cam underwater setup.\u003c\/p\u003e","brand":"DWE","offers":[{"title":"WetLink \/ Standard Fisheye Lens \/ Color Sensor","offer_id":58747336851830,"sku":"DWE-SHDUSB-WL-SL-CS","price":750.0,"currency_code":"EUR","in_stock":true},{"title":"WetLink \/ Standard Fisheye Lens \/ Monochrome","offer_id":58747336884598,"sku":"DWE-SHDUSB-WL-SL-MS","price":750.0,"currency_code":"EUR","in_stock":true},{"title":"WetLink \/ Aquagon™ Lens \/ Color Sensor","offer_id":58747336917366,"sku":"DWE-SHDUSB-WL-AL-CS","price":2450.0,"currency_code":"EUR","in_stock":true},{"title":"WetLink \/ Aquagon™ Lens \/ Monochrome","offer_id":58747336950134,"sku":"DWE-SHDUSB-WL-AL-MS","price":2450.0,"currency_code":"EUR","in_stock":true},{"title":"Cobalt \/ Standard Fisheye Lens \/ Color Sensor","offer_id":58747336982902,"sku":"DWE-SHDUSB-C-SL-CS","price":850.0,"currency_code":"EUR","in_stock":true},{"title":"Cobalt \/ Standard Fisheye Lens \/ Monochrome","offer_id":58747337015670,"sku":"DWE-SHDUSB-C-SL-MS","price":850.0,"currency_code":"EUR","in_stock":true},{"title":"Cobalt \/ Aquagon™ Lens \/ Color Sensor","offer_id":58747337048438,"sku":"DWE-SHDUSB-C-AL-CS","price":2750.0,"currency_code":"EUR","in_stock":true},{"title":"Cobalt \/ Aquagon™ Lens \/ Monochrome","offer_id":58747337081206,"sku":"DWE-SHDUSB-C-AL-MS","price":2750.0,"currency_code":"EUR","in_stock":true},{"title":"SubConn \/ Standard Fisheye Lens \/ Color Sensor","offer_id":58747337113974,"sku":"DWE-SHDUSB-SC-SL-CS","price":990.0,"currency_code":"EUR","in_stock":true},{"title":"SubConn \/ Standard Fisheye Lens \/ Monochrome","offer_id":58747337146742,"sku":"DWE-SHDUSB-SC-SL-MS","price":990.0,"currency_code":"EUR","in_stock":true},{"title":"SubConn \/ Aquagon™ Lens \/ Color Sensor","offer_id":58747337179510,"sku":"DWE-SHDUSB-SC-AL-CS","price":3150.0,"currency_code":"EUR","in_stock":true},{"title":"SubConn \/ Aquagon™ Lens \/ Monochrome","offer_id":58747337212278,"sku":"DWE-SHDUSB-SC-AL-MS","price":3150.0,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1017\/5745\/2662\/files\/StellarHDimage.jpg?v=1789586040"}],"url":"https:\/\/www.substore.fi\/collections\/cameras-sensors.oembed","provider":"Sub Marine Store","version":"1.0","type":"link"}