{"title":"Control, communication \u0026 power","description":"\u003cp\u003eEverything that runs and powers a marine robot: onboard and vision computers, flight controllers, tether interfaces, camera hubs, radios, power distribution, lithium batteries and chargers.\u003c\/p\u003e","products":[{"product_id":"basestation-directional-antenna-kit","title":"BaseStation Directional Antenna Kit","description":"\u003cp\u003eBy default, the \u003ca href=\"\/products\/basestation\"\u003eBaseStation\u003c\/a\u003e comes with an omnidirectional antenna that receives and transmits signals equally in all directions, making it great for short-range general use. For long-range missions, a directional antenna can greatly boost communication range by focusing the signal towards the BlueBoat.\u003c\/p\u003e\n\u003cfigure\u003e\n\u003cimg src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/1017\/5745\/2662\/files\/Directional-Antenna-Diagram-1.png\" alt=\"\"\u003e\n\u003c\/figure\u003e\n\u003ciframe src=\"https:\/\/www.youtube.com\/embed\/TAoYp5voIo8?feature=oembed\" allowfullscreen\u003e\u003c\/iframe\u003e\n\u003cp\u003eThe BaseStation Directional Antenna Kit comes in two versions:\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eThe Panel Antenna Kit provides a mid-range upgrade with a wider 40-degree beamwidth.\u003c\/li\u003e\n\u003cli\u003eThe Yagi Antenna Kit provides a long-range upgrade with a narrower 25-degree beamwidth.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003eBoth kits come with everything needed to install on the BaseStation. You’ll want to mount these on a tripod at least 1.5 meters off the ground, but an even taller tripod will get better performance. Check out the \u003ca href=\"https:\/\/bluerobotics.com\/learn\/directional-antenna-guide\/\"\u003einstallation guide\u003c\/a\u003e for more information about installing these on the BaseStation and configuring settings.\u003c\/p\u003e","brand":"Blue Robotics","offers":[{"title":"Panel Antenna - Mid Range - Directional","offer_id":58746997440886,"sku":"BR-103224","price":90.0,"currency_code":"EUR","in_stock":true},{"title":"Yagi Antenna - Long Range - Highly Directional","offer_id":58746997473654,"sku":"BR-103223","price":140.0,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1017\/5745\/2662\/files\/BR-103224-DIRECTIONAL-ANTENNA-MAIN-PHOTO.jpg?v=1789582479"},{"product_id":"basestation","title":"BlueBoat BaseStation","description":"\u003cp\u003eThe BlueBoat connects with the BaseStation over a 2.4 Ghz wifi radio to provide a connection to your laptop or device. It comes ready to use, with a MikroTik radio, internal battery, and USB-C connectivity.\u003c\/p\u003e\n\u003cp\u003eThe internal radio is set up as an access point, so it broadcasts a wifi network that the BlueBoat and your own device can connect to. That makes it easy to use your boat wirelessly from a tablet or laptop, but you can also make a hardwired connection via the USB-C port.\u003c\/p\u003e\n\u003cp\u003eBy default, the BaseStation comes with an omni-directional whip antenna, providing up to 250 m range. If you need more range, it’s compatible with \u003ca href=\"\/products\/basestation-directional-antenna-kit\"\u003edirectional antennas\u003c\/a\u003e that provide a more focused signal towards the BlueBoat. You can connect an antenna to the N-type bulkhead on the box.\u003c\/p\u003e\n\u003cp\u003eA control pad shows the charge state of the battery and allows you to turn the box on and off and control charging.\u003c\/p\u003e","brand":"Blue Robotics","offers":[{"title":"Default Title","offer_id":58747048591734,"sku":"BR-101669","price":580.0,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1017\/5745\/2662\/files\/IMG_1376-scaled.jpg?v=1789582934"},{"product_id":"battery-cell-checker-r1","title":"Battery Cell Checker","description":"\u003cp\u003eThe Battery Cell Checker is a convenient way to monitor the charge status and health of any 2-6 cell (2-6s) lithium ion battery. It plugs into the battery’s balance plug (a white JST-XH connector) and tells you individual cell voltage, overall pack voltage, and the overall state-of-charge.\u003c\/p\u003e\n\u003cp\u003eWe use these in the field to check each battery before a dive and to sort out charged and discharged batteries afterwards.\u003c\/p\u003e","brand":"Blue Robotics","offers":[{"title":"Default Title","offer_id":58747048624502,"sku":"BR-100757","price":19.0,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1017\/5745\/2662\/files\/IMG_4376.png?v=1789582936"},{"product_id":"battery-charger-h6pro-cab-r1-vp","title":"H6 PRO Battery Charger Cable","description":"\u003cp\u003e Replacement AC power cable for the \u003ca href=\"\/products\/battery-charger-h6pro-r1\"\u003eH6 PRO Lithium Battery Charger\u003c\/a\u003e.\u003c\/p\u003e","brand":"Blue Robotics","offers":[{"title":"North America\/Japan","offer_id":58747048690038,"sku":"BR-100715","price":11.0,"currency_code":"EUR","in_stock":true},{"title":"Australia\/China","offer_id":58747048722806,"sku":"BR-100376","price":11.0,"currency_code":"EUR","in_stock":true},{"title":"Europe","offer_id":58747048755574,"sku":"BR-100907","price":11.0,"currency_code":"EUR","in_stock":true},{"title":"United Kingdom","offer_id":58747048788342,"sku":"BR-100946","price":11.0,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1017\/5745\/2662\/files\/Untitled-1-scaled.jpg?v=1789582936"},{"product_id":"battery-charger-h6pro-r1","title":"H6 PRO Lithium Battery Charger","description":"\u003cp\u003eThe H6 PRO Lithium Battery Charger is a high-power lithium balance charger, perfect for use with all Blue Robotics lithium batteries! With built-in balancing and discharge capability, your batteries can safely be kept in top condition for maximum performance and lifespan! A nominal fixed 10A charge current means you can fully charge a high-capacity lithium battery like our \u003ca href=\"\/products\/battery-li-4s-18ah-r3\"\u003e\u003cbr\u003e\nLithium-ion Battery (14.8V, 18Ah)\u003c\/a\u003e in about 1–2 hours. For even more functionality, the firmware can be unlocked to enable charging other battery chemistries at variable currents.\u003c\/p\u003e","brand":"Blue Robotics","offers":[{"title":"Default Title","offer_id":58747048853878,"sku":"BR-100377","price":185.0,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1017\/5745\/2662\/files\/charger.jpg?v=1789582937"},{"product_id":"battery-li-4s-18ah-r3","title":"Lithium-ion Battery (14.8V, 18Ah)","description":"\u003cp\u003eThe Lithium-ion Battery (14.8V, 18Ah) is a high capacity custom battery pack made from high quality 18650 lithium-ion cells designed for use in the BlueROV2, BlueBoat, and fits perfectly inside a \u003ca href=\"\/products\/wte-locking-tube-r1-vp\"\u003e3″ Watertight Enclosure\u003c\/a\u003e. This 4S (14.8V) battery has a nominal capacity of 18.0Ah, plenty for up to 4 hours of continuous moderate use on the BlueROV2. The lithium-ion cells the battery is comprised of have excellent performance characteristics, as well as a high tolerance for accidental mishandling. The battery is CE (Conformité Européenne) approved, ROHS compliant, and UN38.3 certified. Certificates can be provided upon request.\u003c\/p\u003e\n\u003cp\u003eIf you are located in a country not listed above, we are unable to ship this battery to you. However, we do have a number of distributors that will be able to supply this battery in other parts of the world:\u003c\/p\u003e\n\u003ch3\u003eHigh Capacity, High Restrictions\u003c\/h3\u003e\n\u003cp\u003eThe especially high capacity of this battery means that is subject to more stringent shipping regulations than our other products. In addition to a hazardous goods shipping surcharge, we are also only able to ship this battery to a small number of countries:\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eAustralia\u003c\/li\u003e\n\u003cli\u003eCanada\u003c\/li\u003e\n\u003cli\u003eIndia – Delhi, Karnataka, Tamil Nadu, and Telangana ONLY\u003c\/li\u003e\n\u003cli\u003eJapan\u003c\/li\u003e\n\u003cli\u003eMexico\u003c\/li\u003e\n\u003cli\u003eNew Zealand\u003c\/li\u003e\n\u003cli\u003eSingapore\u003c\/li\u003e\n\u003cli\u003eUnited States of America (excluding Hawaii, Alaska, and Puerto Rico)\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cfigure\u003e\n\u003cimg src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/1017\/5745\/2662\/files\/BATTERY-PRODUCT-PAGE.jpg\" alt=\"\"\u003e\n\u003c\/figure\u003e\n\u003ch3\u003eNo Direct Shipping? Our Distributors Can Help!\u003c\/h3\u003e\n\u003cp\u003eIf you are located in a country that is not listed, we can’t ship this battery directly to you, but we do have a number of distributors that are able to supply batteries in other parts of the world!\u003c\/p\u003e\n\u003ca href=\"#1745593511481-ffff0ca2-d4c8\"\u003e\u003cstrong\u003eDistributors who stock this battery:\u003c\/strong\u003e\u003c\/a\u003e\n\u003cul\u003e\n\u003cli\u003eBrazil: \u003ca href=\"https:\/\/brsrobotica.com\/\"\u003eBRS Robotica\u003c\/a\u003e and \u003ca href=\"http:\/\/www.fulltechdive.com.br\/site\/contato\/index.html\"\u003eFull Tech\u003c\/a\u003e\n\u003c\/li\u003e\n\u003cli\u003eChile: \u003ca href=\"https:\/\/adentu.cl\/producto\/bateria-li-ion-18mah-14-8v\/\"\u003eADENTU\u003c\/a\u003e and \u003ca href=\"http:\/\/rovservice.cl\/contacto\/\"\u003eROV Service Chile\u003c\/a\u003e\n\u003c\/li\u003e\n\u003cli\u003eChina: \u003ca href=\"http:\/\/www.oceasian.com\/\"\u003eOceasian Technology\u003c\/a\u003e and \u003ca href=\"http:\/\/www.aohi-tec.com\/home\"\u003eHangzhou AOHAI Marine Engineering\u003c\/a\u003e\n\u003c\/li\u003e\n\u003cli\u003eDenmark: \u003ca href=\"https:\/\/www.sepcotech.com\/blueboat-uncrewed-surface-vessel\"\u003eSepcoTech\u003c\/a\u003e and \u003ca href=\"https:\/\/www.subcpartner.com\/services\/rov-subsea\/bluerov2\"\u003eSubC Partner\u003c\/a\u003e.\n\u003c\/li\u003e\n\u003cli\u003eFinland: \u003ca href=\"https:\/\/www.substore.fi\/product\/308\/bluerobotics-lithium-ion-battery-148v-18ah\"\u003eSub Marine Store\u003c\/a\u003e\n\u003c\/li\u003e\n\u003cli\u003eFrance: \u003ca href=\"https:\/\/rov-expert.fr\/1522-alimentations-batteries-chargeurs\"\u003eROV Expert\u003c\/a\u003e and \u003ca href=\"http:\/\/syera.fr\/boutique\/fr\/energie\/306-batterie-li-ion-4s-18ah.html\"\u003eSyERA\u003c\/a\u003e\n\u003c\/li\u003e\n\u003cli\u003eGermany: \u003ca href=\"https:\/\/underwater-international.com\/produkt\/lithium-ion-battery-14-8v-18ah\/\"\u003eUnderwater International GmbH\u003c\/a\u003e\n\u003c\/li\u003e\n\u003cli\u003eGreece: \u003ca href=\"https:\/\/bluerobotics.imachines.gr\/store\/lithium-ion-battery-14-8v-18ah\/\"\u003eIntelligent Machines\u003c\/a\u003e\n\u003c\/li\u003e\n\u003cli\u003eIndia: \u003ca href=\"https:\/\/www.oceanrobotix.com\/\"\u003eOcean Robotix\u003c\/a\u003e\n\u003c\/li\u003e\n\u003cli\u003eItaly: SubSeaRov\u003c\/li\u003e\n\u003cli\u003eJapan: \u003ca href=\"https:\/\/www.rov-fun.com\/\"\u003eROV FUN\u003c\/a\u003e, \u003ca href=\"https:\/\/sekido-rc.com\/?pid=122438977\"\u003eSEKIDO\u003c\/a\u003e and \u003ca href=\"https:\/\/underwaterdrone.stores.jp\/items\/5cda24e0adb2a142f3b4a89b\"\u003eSix Voice\u003c\/a\u003e\n\u003c\/li\u003e\n\u003cli\u003eMexico: \u003ca href=\"http:\/\/aquaexploracion.mx\/\"\u003eAqua Exploración\u003c\/a\u003e\n\u003c\/li\u003e\n\u003cli\u003eNetherlands: \u003ca href=\"https:\/\/www.seascapesubsea.com\/product\/batteries-and-chargers\/\"\u003eSeascape Subsea\u003c\/a\u003e\n\u003c\/li\u003e\n\u003cli\u003eNew Zealand: \u003ca href=\"https:\/\/baydynamics.co.nz\/product\/lithium-ion-battery-14-8v-18000mah\/\"\u003eBay Dynamics\u003c\/a\u003e\n\u003c\/li\u003e\n\u003cli\u003eNorway: \u003ca href=\"https:\/\/www.jmrobotics.no\/p\/lithium-ion-batteri-148v-18ah\"\u003eJM Robotics\u003c\/a\u003e\n\u003c\/li\u003e\n\u003cli\u003eSingapore: \u003ca href=\"https:\/\/aquabots-shop.myshopify.com\/collections\/batteries-and-chargers\/products\/blue-robotics-lithium-ion-battery-14-8v-18ah\"\u003eAqua Bots\u003c\/a\u003e\n\u003c\/li\u003e\n\u003cli\u003eSpain: Casco Antiguo and \u003ca href=\"https:\/\/www.qstar.eu\/contacto?lang=en\"\u003eQSTAR\u003c\/a\u003e\n\u003c\/li\u003e\n\u003cli\u003eUAE: \u003ca href=\"https:\/\/www.invoceangroup.com\/rovbatteries\"\u003eInvocean\u003c\/a\u003e\n\u003c\/li\u003e\n\u003cli\u003eUK: \u003ca href=\"https:\/\/www.btowstore.com\/epages\/BT4529.sf\/en_GB\/?ObjectPath=\/Shops\/BT4529\/Categories\/ContactForm\"\u003eBuccaneer\u003c\/a\u003e and \u003ca href=\"https:\/\/www.carcinus.co.uk\/product\/lithium-ion-battery-14-8v-18ah\/\"\u003eCarcinus\u003c\/a\u003e\n\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ca href=\"#1745593511484-04766850-97e2\"\u003e\u003cstrong\u003eDistributors who stock a similar battery:\u003c\/strong\u003e\u003c\/a\u003e\n\u003cp\u003eWe also have Distributors who do not stock this exact battery, but do stock similar ones!\u003c\/p\u003e\n\u003cp\u003e\u003cem\u003eSince these are not official Blue Robotics batteries, it’s important to verify all technical specifications before use.\u003c\/em\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eFinland: \u003ca href=\"https:\/\/www.substore.fi\/product\/309\/sub-marine-store---lithium-ion-battery-148v-18ah\"\u003eSub Marine Store\u003c\/a\u003e\n\u003c\/li\u003e\n\u003cli\u003eIndia: \u003ca href=\"https:\/\/www.banergy.com\/batteries\"\u003eBanergy\u003c\/a\u003e\n\u003c\/li\u003e\n\u003cli\u003eIsrael: \u003ca href=\"https:\/\/astralsubsea.com\/battery\/\"\u003eAstral-Subsea\u003c\/a\u003e\n\u003c\/li\u003e\n\u003cli\u003ePhilippines: \u003ca href=\"https:\/\/www.deltarov.com\/product-page\/lithium-ion-battery-14-8v-18ah\"\u003eDelta ROV\u003c\/a\u003e\n\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Blue Robotics","offers":[{"title":"Default Title","offer_id":58747049083254,"sku":"BR-100842","price":425.0,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1017\/5745\/2662\/files\/IMG_4692.jpg?v=1789582941"},{"product_id":"bec-5v6a-r1","title":"5V 6A Power Supply","description":"\u003cp\u003eThis power supply provides 5v power at up to 6A. It accepts input voltages from 7v to 26v and uses a switching converter with minimal heat loss. It comes with two standard servo-style connectors, making it easy to use to power the Navigator or Pixhawk 5v rail for servos, the Raspberry Pi, or other 5v devices.\u003c\/p\u003e","brand":"Blue Robotics","offers":[{"title":"Default Title","offer_id":58747049181558,"sku":"BR-100869","price":32.0,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1017\/5745\/2662\/files\/IMG_3085.png?v=1789582944"},{"product_id":"bluart-r1-rp","title":"BLUART USB to TTL Serial and RS485 Adapter","description":"\u003cp\u003eThe BLUART USB to Serial and RS485 Adapter is a tiny circuit board capable of interfacing via USB with devices that use serial UART or RS485 communications.\u003c\/p\u003e\n\u003cp\u003eUARTs (more commonly known as serial ports) are used on a wide range of devices such as Arduino microcontrollers, subsea sensors, and our \u003ca href=\"\/products\/ping-sonar-r2-rp\"\u003ePing Sonar\u003c\/a\u003e. A UART uses separate transmit (TX) and receive (RX) signal lines, which allows \u003ca href=\"https:\/\/en.wikipedia.org\/wiki\/Duplex_(telecommunications)\"\u003efull-duplex\u003c\/a\u003e communication.\u003c\/p\u003e\n\u003cp\u003eRS485 is a variation of serial communication intended for communication over long cable lengths. RS485 uses a differential signal on a twisted pair of wires, which protects the signal integrity over hundreds of meters of cable length. The same wires are used for both transmitting and receiving, so you can only do one at a time. This is called half-duplex. Many subsea sensors and tools including sonars, water chemistry sensors, and manipulators use RS485 communication.\u003c\/p\u003e\n\u003cp\u003eThe BLUART has JST-GH connector ports and through-hole options for either serial UART or RS485 connections. Only one connection type may be used at a time. The indicator lights signal for adequate power and when receiving and\/or transmitting data.\u003c\/p\u003e\n\u003cp\u003eThe BLUART is open-source and the \u003ca href=\"https:\/\/bluerobotics.com\/wp-content\/uploads\/2018\/06\/BLUART-R1-Schematic.pdf\"\u003eschematic\u003c\/a\u003e is freely available.\u003c\/p\u003e","brand":"Blue Robotics","offers":[{"title":"Default Title","offer_id":58747049443702,"sku":"BR-100871","price":56.0,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1017\/5745\/2662\/files\/IMG_1067.jpg?v=1789582946"},{"product_id":"blueboat-antenna-and-accessory-mast","title":"BlueBoat Antenna and Accessory Mast","description":"\u003cp\u003eThe BlueBoat Antenna and Accessory Mast boosts BlueBoat communication range by raising the antenna above the surface of the water.\u003c\/p\u003e\n\u003cp\u003eHigh-frequency radio waves like the Wi-Fi signal used by the BlueBoat rely on clear line of sight to stay strong and stable. When the antenna sits low to the water, waves and surface chop can block or absorb the signal. Reflections off the water surface can also cause interference and reduce performance.\u003c\/p\u003e\n\u003cp\u003eThis mast raises the antenna two feet above the BlueBoat deck, improving line of sight for stronger, more stable communication. In our testing, this simple change increased communication range by up to two times on average. It’s compatible with both the standard Wi-Fi antenna and the \u003ca href=\"\/products\/blueboat-cellular-modem-kit\"\u003eCellular Modem Kit\u003c\/a\u003e antenna.\u003c\/p\u003e\n\u003ciframe src=\"https:\/\/www.youtube.com\/embed\/TAoYp5voIo8?feature=oembed\" allowfullscreen\u003e\u003c\/iframe\u003e\n\u003cfigure\u003e\n\u003cimg src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/1017\/5745\/2662\/files\/antenna-mast-product-page-01.jpg\" alt=\"\"\u003e\n\u003c\/figure\u003e\n\u003ch3\u003eMounting the Mast and More\u003c\/h3\u003e\n\u003cp\u003eAnd it’s not just for antennas—you can mount payloads like weather sensors, lights, and more.\u003c\/p\u003e\n\u003cp\u003eThe mast is made of anodized aluminum with UV-stabilized polycarbonate brackets and mounts directly to any of the BlueBoat’s frame brackets. You can even install more than one if you have multiple antennas or accessories. It adjusts from 0° to 180° in 22.5° increments and folds flat for transport.\u003c\/p\u003e\n\u003cp\u003eA cable for installing an antenna is included, but you can also run your own cables through the mast for other payloads. All mounting hardware is included, see the \u003ca href=\"https:\/\/bluerobotics.com\/learn\/installing-the-blueboat-antenna-and-accessory-mast\/\"\u003einstallation guide\u003c\/a\u003e for full details.\u003c\/p\u003e","brand":"Blue Robotics","offers":[{"title":"Default Title","offer_id":58747049476470,"sku":"BR-103542","price":100.0,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1017\/5745\/2662\/files\/blueboat-antenna-accessory-mast-BR-103542-1.jpg?v=1789582947"},{"product_id":"blueboat-cellular-modem-kit","title":"BlueBoat Cellular Modem Kit","description":"\u003cp\u003eSay goodbye to range anxiety! This 4G LTE global cellular modem provides mobile network connectivity for the BlueBoat, enabling long-range communication beyond the reach of the BaseStation.\u003c\/p\u003e\n\u003cp\u003eWith a cellular connection, the BlueBoat can operate remotely while you control and monitor it from hundreds of miles away. Just like your cell phone, the modem connects to mobile networks using 4G LTE, so the BlueBoat can stay online anywhere with cellular coverage.\u003c\/p\u003e\n\u003cp\u003eThe cellular connection is best suited for low-bandwidth tasks like viewing telemetry, monitoring and updating missions, or issuing commands. It’s not ideal for high-bandwidth devices or payloads due to potential high data costs and lower connection speed.\u003c\/p\u003e\n\u003ciframe src=\"https:\/\/www.youtube.com\/embed\/TAoYp5voIo8?feature=oembed\" allowfullscreen\u003e\u003c\/iframe\u003e\n\u003cfigure\u003e\n\u003cimg src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/1017\/5745\/2662\/files\/Cellular-Diagram-770x471-1.png\" alt=\"\"\u003e\u003cfigcaption\u003eOn the left: the BlueBoat connected using the BaseStation. On the right: the Blueboat connected using the Cellular Modem.\u003c\/figcaption\u003e\n\u003c\/figure\u003e\n\u003ch3\u003eBeyond the BaseStation\u003c\/h3\u003e\n\u003cp\u003eThe compact modem is installed inside the BlueBoat’s port hatch lid. It connects via USB-C and includes an external omnidirectional antenna covering 600 MHz to 2700 MHz for wide compatibility with global LTE bands.\u003c\/p\u003e\n\u003cp\u003eThe kit includes all the parts needed for installation on the BlueBoat, and a BlueOS extension is available to easily configure and monitor modem settings directly from the BlueOS interface. The modem itself can also be used to add cellular connectivity to many other types of devices.\u003c\/p\u003e\n\u003cp\u003eA \u003ca href=\"https:\/\/www.hologram.io\/\"\u003eHologram global IoT\u003c\/a\u003e SIM card is included for quick startup. Hologram is a cellular provider built specifically for Internet of Things (IoT) devices. They offer a global SIM card and platform that simplifies global coverage across hundreds of carriers. You can activate it instantly and get online anywhere Hologram supports, but we recommend switching to a local carrier SIM for the best data rates and coverage in your operating region.\u003c\/p\u003e\n\u003ciframe src=\"https:\/\/www.youtube.com\/embed\/18Eco-BxXaE?feature=oembed\" allowfullscreen\u003e\u003c\/iframe\u003e","brand":"Blue Robotics","offers":[{"title":"Default Title","offer_id":58747050721654,"sku":"BR-103376","price":210.0,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1017\/5745\/2662\/files\/bb-cellular-modem-1.jpg?v=1789582948"},{"product_id":"blueos-microsd-card","title":"BlueOS MicroSD Card","description":"\u003cp\u003eThis 128 GB micro SD card is loaded with BlueOS for the Raspberry Pi computer to help you get started quickly and easily. It can be configured with ArduSub for ROVs, ArduRover for USVs, or any other ArduPilot control software.\u003c\/p\u003e\n\u003cp\u003eThis product is provided for convenience, but you can also \u003ca href=\"https:\/\/blueos.cloud\/docs\/latest\/usage\/installation\/\"\u003eflash your own SD card with BlueOS using the instructions here\u003c\/a\u003e.\u003c\/p\u003e","brand":"Blue Robotics","offers":[{"title":"Default Title","offer_id":58747051835766,"sku":"BR-100578","price":32.0,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1017\/5745\/2662\/files\/BR-100578-BLUEOS-MICROSD-CARD-03-scaled.jpg?v=1789582957"},{"product_id":"brov2-cab-power-bullet-connector-r1-rp","title":"Battery Power Cable Set","description":"\u003cp\u003eThis is the power cable set on the BlueROV2 that connects the battery enclosure to the main electronics enclosure. It has preinstalled WetLink Penetrators and 5.5 mm bullet connectors.\u003c\/p\u003e\n\u003cp\u003eThese cables use the \u003ca href=\"\/products\/high-temperature-pur-subsea-cable\"\u003esame three-conductor cable as our thrusters\u003c\/a\u003e and the \u003ca href=\"\/products\/wlp-vp\"\u003e6.5mm version of the WetLink Penetrator\u003c\/a\u003e that work with that cable. With three 16 AWG conductors for both positive and negative, this is \u003ca href=\"https:\/\/bluerobotics.com\/learn\/voltage-drop-calculator\/?gauge=16%20AWG\u0026amp;conductors=3\u0026amp;voltage=16%20V\u0026amp;length=489%20mm\u0026amp;input=60%20A\"\u003eequivalent to a single 11 AWG wire\u003c\/a\u003e, providing ample copper for efficient power transmission. The cables include red and black heat-shrink to indicate polarity when installed.\u003c\/p\u003e\n\u003cp\u003eThis cable can be used as a replacement on your BlueROV2 and it’s a great option if you’re building an ROV from scratch as well!\u003c\/p\u003e","brand":"Blue Robotics","offers":[{"title":"Default Title","offer_id":58747052294518,"sku":"BR-100259","price":80.0,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1017\/5745\/2662\/files\/BROV2-CAB-POWER-SET-R1-RP-1-scaled.jpg?v=1789582962"},{"product_id":"cmdr-r1-rp","title":"Thruster Commander","description":"\u003cp\u003eHave you ever wanted to put thrusters on a kayak, stand-up paddleboard, surfboard, or just wanted an easier way to get them up and running in the shop? If so, the Thruster Commander is the perfect tool to help with that.\u003c\/p\u003e\n\u003cp\u003eThe Thruster Commander comes with a small control unit that has inputs and outputs along with potentiometers, knobs, cables, and terminal blocks. The control unit is designed to be a flexible as possible and has the following features:\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e2 thruster output channels (but four outputs so you can double up each channel)\u003c\/li\u003e\n\u003cli\u003eInput channels for independent LEFT\/RIGHT control\u003c\/li\u003e\n\u003cli\u003eInput channels for mixed SPEED\/STEERING control\u003c\/li\u003e\n\u003cli\u003eSwitch input for toggle switch or deadman switch (normally closed with a jumper)\u003c\/li\u003e\n\u003cli\u003ePower through ESC’s BEC if available or 7–20v through the included cable\u003c\/li\u003e\n\u003cli\u003eAnodized aluminum case with mounting holes\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ciframe src=\"https:\/\/www.youtube.com\/embed\/5SLveWeL3XM?feature=oembed\" allowfullscreen\u003e\u003c\/iframe\u003e\n\u003cfigure\u003e\n\u003cimg src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/1017\/5745\/2662\/files\/CMDR-QUICK-START-DIAGRAM-R1-1-1024x615.png\" alt=\"\"\u003e\n\u003c\/figure\u003e\n\u003cp\u003eUsing the independent inputs, you can control one or both of the thruster output channels separately. This is perfect for testing thrusters in the shop or running them in a permanent installation. We use this setup in our own thruster production process to quickly test thruster functionality. The mixed speed and steering inputs are perfect anytime you’re using two thrusters side-by-side on a vehicle and want control over combined speed as well as differential steering.\u003c\/p\u003e\n\u003cp\u003ePlease note that none of the components in the Thruster Commander are waterproof! They are meant to be integrated into a larger project. We recommend installing them in a waterproof case. The potentiometers are panel-mount style and include nuts to fasten them to a control panel.\u003c\/p\u003e\n\u003cp\u003eThere are a lot of neat things that you can do with the Thruster Commander, but we put together a video of one example using a stand-up paddleboard. Check it out!\u003c\/p\u003e\n\u003cp\u003eFor most applications, we recommend pairing the Thruster Commander with the T200 or \u003ca href=\"\/products\/t500-thruster\"\u003eT500\u003c\/a\u003e thrusters and Basic ESCs.\u003c\/p\u003e","brand":"Blue Robotics","offers":[{"title":"Default Title","offer_id":58747053605238,"sku":"BR-100795","price":68.0,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1017\/5745\/2662\/files\/commander-3.png?v=1789582973"},{"product_id":"df13-to-jst-gh-adapter-board","title":"JST GH to DF13 Adapter, 4-pin","description":"\u003cp\u003eBefore May 2022, our I\u003csup\u003e2\u003c\/sup\u003eC pressure and temperature sensors came preinstalled with a DF13 connector. Starting in May 2022, that has been updated to a JST GH connector.\u003c\/p\u003e\n\u003cp\u003eThis adapter allows you to convert from one connector type to the other, making older sensors compatible with new hardware and newer sensors compatible with old hardware! You may need this if you’ve designed the original DF13 connector into your product design and need to be able to continue building it with newly purchased sensors.\u003c\/p\u003e\n\u003cp\u003eThe PCB comes with DF13 to DF13 and JST GH to JST GH cables in 100mm lengths.\u003c\/p\u003e","brand":"Blue Robotics","offers":[{"title":"Default Title","offer_id":58747053867382,"sku":"BR-100774","price":12.0,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1017\/5745\/2662\/files\/MISC-JSTGH-DF13-ADAPTER-R1-RP-1.jpg?v=1789582976"},{"product_id":"ethswitch","title":"Ethernet Switch","description":"\u003cp\u003eThe Ethernet Switch is a 5-port 10\/100 Ethernet switch designed to integrate perfectly with the BlueROV2 and BlueBoat, providing three additional Ethernet ports to connect accessories. This switch was designed in collaboration with \u003ca href=\"https:\/\/www.botblox.io\/\"\u003eBotBlox\u003c\/a\u003e and leverages their extensive expertise on Ethernet switches for robotics applications!\u003c\/p\u003e\n\u003ch3\u003eWhy do I need an Ethernet switch?\u003c\/h3\u003e\n\u003cp\u003eEthernet networks form a high-speed connection between computers and they are a backbone of the internet! We also use an Ethernet network on the BlueROV2 that connects the surface computer to the ROV’s onboard computer, providing a high-speed connection that carries telemetry data and video. There’s a lot of extra bandwidth available on that network that can be leveraged for other devices, like sonars, IP cameras, and sensors.\u003c\/p\u003e\n\u003cp\u003eEthernet allows multiple devices to be connected to the same network, however you can’t simply connect all the cables together, you need an Ethernet switch to route data between connections. This Ethernet switch does exactly that! With 5 ports, two are used to connect to the existing Fathom-X and Raspberry Pi computer in the ROV, leaving three additional ports for expansion!\u003c\/p\u003e\n\u003cp\u003eJust imagine what you can do with three more ports! You could add a multibeam imaging sonar, add an additional computer for dedicated computer vision processing, or connect a high-end IP camera for new video options! The possibilities are endless!\u003c\/p\u003e\n\u003cfigure\u003e\n\u003cimg src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/1017\/5745\/2662\/files\/ethswitch-usage-diagram-1.png\" alt=\"Ethernet Switch Usage Diagram on ROV\"\u003e\n\u003c\/figure\u003e\n\u003ch3\u003eHow does it integrate?\u003c\/h3\u003e\n\u003cp\u003eThe Ethernet Switch is designed to be a perfect complement for the \u003ca href=\"\/products\/fathom-x-tether-interface-board-set-copy\"\u003eFathom-X board\u003c\/a\u003e. It has the same dimensions and mounting holes so that it can stack on top. Two RJ45 port connections are available to quickly connect the Fathom-X and Raspberry Pi through the switch, while the remaining connections are broken out to JST-GH connectors that follow the \u003ca href=\"https:\/\/bluerobotics.com\/learn\/wl-connector-standard\/\"\u003eBlue Robotics Connector Standard\u003c\/a\u003e. The board can be powered from a wide voltage input up to 52 V and has low power consumption. Indicator lights show activity on each port.\u003c\/p\u003e\n\u003cp\u003eThe switch comes with an RJ45 to JST-GH adapter board to make it easy to connect your Ethernet device during testing, but we recommend solder splicing one of the included JST-GH cables to your device for long term integration on an ROV since a standard RJ45 connector does not fit through a cable penetrator hole.\u003c\/p\u003e\n\u003cp\u003eThe Ethernet Switch is cool, but what you integrate with it is the really cool part! Please feel free to share your integration on the Blue Robotics discussion forum where it might help others to find new ways to use their ROV.\u003c\/p\u003e","brand":"Blue Robotics","offers":[{"title":"Default Title","offer_id":58747054227830,"sku":"BR-100457","price":185.0,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1017\/5745\/2662\/files\/BR-100457-ETHERNET-SWITCH-01-scaled.jpg?v=1789582978"},{"product_id":"etray4-conn-r1-rp","title":"Electronics Tray Terminal Blocks and Hardware","description":"\u003cp\u003eTerminal Blocks and Hardware for \u003ca href=\"\/products\/wte4-etray-r1\"\u003eElectronics Tray (4″ Series)\u003c\/a\u003e.\u003c\/p\u003e","brand":"Blue Robotics","offers":[{"title":"Default Title","offer_id":58747054260598,"sku":"BR-100454","price":69.0,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1017\/5745\/2662\/files\/ETRAY4-CONN-R1-RP.png?v=1789582979"},{"product_id":"fathom-x-tether-interface-board-set-copy","title":"Fathom-X Tether Interface Board","description":"\u003cp\u003eThe Fathom-X Tether Interface Board provides a high-speed, long-distance Ethernet connection to an ROV or other remote platform. They’re designed for use with the \u003ca href=\"\/products\/fathom-rov-tether-by-the-meter\"\u003eFathom tether\u003c\/a\u003e, standard Cat5 cable, or even a single twisted pair of wires. This board uses a HomePlug module, which leverages the robust HomePlug AV (IEEE-1901) standard for sending Ethernet through powerlines. It has the following features:\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e80 Mbps Ethernet over two wires (per our own bandwidth testing)\u003c\/li\u003e\n\u003cli\u003e300m+ tether length capability\u003c\/li\u003e\n\u003cli\u003ePlug-and-play with no setup involved\u003c\/li\u003e\n\u003cli\u003eOnboard switching power supply with 7-28V input range\u003c\/li\u003e\n\u003cli\u003eUSB Mini-B connector for powering directly from a computer on the topside\u003c\/li\u003e\n\u003cli\u003eIndicator LEDs for power, link, and data\u003c\/li\u003e\n\u003cli\u003eIncluded 6″ Ethernet cable for connection to onboard computer\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003eWith the Fathom-X the exact same board is used on each end of the tether. One on the ROV and one on the topside. You can even connect \u003cem\u003emore than two of these boards to the same tether lines\u003c\/em\u003e. (Not sure why you’d want that… two ROVs on one tether?!)\u003c\/p\u003e\n\u003cp\u003eThe Fathom-X Tether Interface Board is open-source and open-hardware, so the schematics and board files are free to view, modify, and reuse. The electrical schematic and board layout are open-source and the design files are available below. \u003c\/p\u003e","brand":"Blue Robotics","offers":[{"title":"Single","offer_id":58747054686582,"sku":"BR-100023","price":140.0,"currency_code":"EUR","in_stock":true},{"title":"Pair","offer_id":58747054719350,"sku":"BR-100178","price":280.0,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1017\/5745\/2662\/files\/Fathom-X-2.png?v=1789582982"},{"product_id":"fxti-asm-r1-rp","title":"Fathom-X Tether Interface (FXTI)","description":"\u003cp\u003eThe Fathom-X Tether Interface (or FXTI) is a simple and expandable topside enclosure to interface with the BlueROV2 and other devices that use HomePlug communication technology. The FXTI has a USB-B connection on one side and a Binder 770 connector on the other. The USB connection provides power to the box and is internally connected to a USB to Ethernet adapter that is connected to a Fathom-X tether interface board. The interface board is connected to the Binder 770 connector for a clean connection to the tether!\u003c\/p\u003e\n\u003cp\u003eThis product works great as a clean connection from the computer to the tether, but it is designed to be highly expandable for other applications. The Binder 770 connector has leads for all 8 wires, providing full support for both the slim and regular Fathom tethers. Those leads are reconfigurable within the box so that you can quickly use an extra twisted pair from the tether for the Water Linked Analog Locator or any RS485 device.\u003c\/p\u003e\n\u003cp\u003eTwo additional holes are provided on the box and are sized properly to accept additional \u003ca href=\"\/products\/binder-770-bulkhead\"\u003eBinder 770 Bulkhead Connector\u003c\/a\u003e or our standard penetrators.\u003c\/p\u003e\n\u003cp\u003eIndicator lights on the top of the box show the “power” and “link” status from the Fathom-X board. The USB-B connection provides a solid connector that is unlikely to be damaged during transit or operation.\u003c\/p\u003e","brand":"Blue Robotics","offers":[{"title":"Default Title","offer_id":58747055047030,"sku":"BR-100679","price":245.0,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1017\/5745\/2662\/files\/IMG_1244-2.jpg?v=1789582985"},{"product_id":"i2c-bus-splitter","title":"I\u003csup\u003e2\u003c\/sup\u003eC Bus Splitter","description":"\u003cp\u003eThe I\u003csup\u003e2\u003c\/sup\u003eC Bus Splitter allows the connection of more I\u003csup\u003e2\u003c\/sup\u003eC devices by sharing the same bus. This enables sensors like the Bar30 and \u003ca href=\"\/products\/celsius-sensor-r1\"\u003eCelsius\u003c\/a\u003e to be installed on the same I\u003csup\u003e2\u003c\/sup\u003eC bus.\u003c\/p\u003e\n\u003cp\u003eThe bus splitter has several different types of connectors to allow for forwards and backwards compatibility with various sensors and autopilots. There are four DF-13 connectors, four JST-GH connectors, and through-holes for one 0.1″ header connector.\u003c\/p\u003e\n\u003cp\u003eJust plug any of the eight ports into a Pixhawk or compatible autopilot’s I\u003csup\u003e2\u003c\/sup\u003eC line with the provided cable and the remaining ports on the splitter will be ready to use for slave devices I\u003csup\u003e2\u003c\/sup\u003eC.\u003c\/p\u003e","brand":"Blue Robotics","offers":[{"title":"Default Title","offer_id":58747055341942,"sku":"BR-100694","price":16.0,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1017\/5745\/2662\/files\/P9700742-close.jpg?v=1789582986"},{"product_id":"jst-gh-extension-cables","title":"JST GH Extension Cables","description":"\u003cp\u003eHave you ever tried to find a JST GH cable with a plug on one end and a free-hanging receptacle on the other? They’re impossible to find! We couldn’t find any, so we made our own, and now you can get them here.\u003c\/p\u003e\n\u003cp\u003eEach extension cable has a JST GH plug on one end and a receptacle on the other. Available in 4-pin and 6-pin versions in 150 mm, 300 mm, and 600 mm lengths. The 4-pin version has two twisted pairs (pins 1-4 and 2-3) and the 6-pin version has 3 twisted pairs (pins 1-2, 3-4, and 5-6).\u003c\/p\u003e\n\u003cp\u003eThese cables follow the \u003ca href=\"https:\/\/bluerobotics.com\/learn\/wl-connector-standard\/\"\u003eBlue Robotics Connector Standard\u003c\/a\u003e for Ethernet and serial connections but can be used for general purpose JST GH connections too.\u003c\/p\u003e","brand":"Blue Robotics","offers":[{"title":"4-pin - 150 mm","offer_id":58747055538550,"sku":"BR-103531-150","price":6.0,"currency_code":"EUR","in_stock":true},{"title":"4-pin - 300 mm","offer_id":58747055571318,"sku":"BR-103531-300","price":7.0,"currency_code":"EUR","in_stock":true},{"title":"4-pin - 600 mm","offer_id":58747055604086,"sku":"BR-103531-600","price":8.0,"currency_code":"EUR","in_stock":true},{"title":"6-pin - 150 mm","offer_id":58747055636854,"sku":"BR-105019-150","price":6.0,"currency_code":"EUR","in_stock":true},{"title":"6-pin - 300 mm","offer_id":58747055669622,"sku":"BR-105019-300","price":7.0,"currency_code":"EUR","in_stock":true},{"title":"6-pin - 600 mm","offer_id":58747055702390,"sku":"BR-105019-600","price":8.0,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1017\/5745\/2662\/files\/JST-GH-EXTENSION_07-e1773150402429.jpg?v=1789582988"},{"product_id":"level-converter-r1","title":"I\u003csup\u003e2\u003c\/sup\u003eC Level Converter","description":"\u003cp\u003eThe I\u003csup\u003e2\u003c\/sup\u003eC Level Converter allows you the run 3.3V logic sensors like the Bar30 or \u003ca href=\"\/products\/celsius-sensor-r1\"\u003eCelsius\u003c\/a\u003e and other accessories off of a 5V logic device like the Arduino Uno!\u003c\/p\u003e\n\u003cp\u003eA selectable solder jumper lets you run 5V or 3.3V power to your sensor, independent of the 3.3V I\u003csup\u003e2\u003c\/sup\u003eC logic. Built in four-pin DF13, JST GH, and 0.1″ header pin connectors provide maximum flexibility and ease of use.\u003c\/p\u003e","brand":"Blue Robotics","offers":[{"title":"Default Title","offer_id":58747055767926,"sku":"BR-100087","price":30.0,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1017\/5745\/2662\/files\/level-converter-1.png?v=1789582989"},{"product_id":"mega-battery","title":"Lithium-ion Battery (22.2V, 28Ah)","description":"","brand":"Blue Robotics","offers":[{"title":"Default Title","offer_id":58747056456054,"sku":"BR-100313","price":1490.0,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1017\/5745\/2662\/files\/BATTERY-LI-6S-28AH-ADAPTED-R1-RP_2-scaled.jpg?v=1789582994"},{"product_id":"misc-cab-usb-micro-left-angle-6in-r1","title":"6\" Left Angle Micro-USB to USB-A Cable","description":"\u003cp\u003eThe 6″ Left Angle Micro-USB to USB-A Cable easily connects small devices to each other inside small spaces such as the \u003ca href=\"\/products\/bluart-r1-rp\"\u003eBLUART USB to Serial and RS485 Adapter\u003c\/a\u003e or Pixhawk autopilot to a Raspberry Pi 3.\u003c\/p\u003e\n\u003cp\u003eThis is the same cable which connects the Pixhawk to the Raspberry Pi 3 inside the R1, R2, and R3 BlueROV2.\u003c\/p\u003e","brand":"Blue Robotics","offers":[{"title":"Default Title","offer_id":58747056488822,"sku":"BR-100650","price":9.0,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1017\/5745\/2662\/files\/IMG_3396.png?v=1789582996"},{"product_id":"misc-cab-usb-micro-straight-6in-r1","title":"6\" Straight Micro-USB to USB-A Cable","description":"\u003cp\u003eThe 6″ Straight Micro-USB to USB-A Cable easily connects small devices to each other inside small spaces such as the \u003ca href=\"\/products\/bluart-r1-rp\"\u003eBLUART USB to Serial and RS485 Adapter\u003c\/a\u003e or Pixhawk autopilot to a \u003ca href=\"\/products\/raspberry-pi\"\u003eRaspberry Pi 3\/4\u003c\/a\u003e.\u003c\/p\u003e","brand":"Blue Robotics","offers":[{"title":"Default Title","offer_id":58747056521590,"sku":"BR-100585","price":9.0,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1017\/5745\/2662\/files\/IMG_3399.png?v=1789582996"},{"product_id":"misc-pcb-rj45-jstgh","title":"RJ45 to JST GH Adapter","description":"\u003cp\u003eOur \u003ca href=\"\/products\/ethswitch\"\u003eEthernet Switch\u003c\/a\u003e product follows the \u003ca href=\"https:\/\/bluerobotics.com\/learn\/wl-connector-standard\/#ethernet-10100\"\u003eBlue Robotics Connector Standard\u003c\/a\u003e, using JST GH connectors for Ethernet connectivity. This board and cable allows those connections to be extended to standard RJ45 connections, which come standard on many Ethernet devices. The Ethernet Switch comes with one of these adapters, but more may be required for your application.\u003c\/p\u003e","brand":"Blue Robotics","offers":[{"title":"Default Title","offer_id":58747056947574,"sku":"BR-100851","price":8.0,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1017\/5745\/2662\/files\/MISC-PCB-RJ45-JSTGH-R1-RP-2.jpg?v=1789582997"},{"product_id":"navigator","title":"Navigator Flight Controller","description":"\u003cp\u003eThe Navigator is an expansion board that plugs into the Raspberry Pi 4 and turns it into a fully-featured flight controller, ready to power ROVs, USVs, drones, ground vehicles, and just about anything that moves!\u003c\/p\u003e\n\u003cp\u003eAt its core, the Navigator is a collection of inputs and outputs. It has inputs from onboard sensors, outputs to servos or speed controllers, and expansions ports that can be connected to external devices.\u003c\/p\u003e\n\u003cp\u003eOnboard, the Navigator has:\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e6-axis IMU with accelerometers and gyroscopes for orientation\u003c\/li\u003e\n\u003cli\u003eDual three-axis magnetometers for compass heading\u003c\/li\u003e\n\u003cli\u003eBarometer for altitude in air\u003c\/li\u003e\n\u003cli\u003e16 servo PWM channel outputs\u003c\/li\u003e\n\u003cli\u003eCurrent and voltage ADC inputs\u003c\/li\u003e\n\u003cli\u003eBuilt-in leak detection for 2 probes\u003c\/li\u003e\n\u003cli\u003eRC receiver input (SBUS)\u003c\/li\u003e\n\u003cli\u003eRGB status LED\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cfigure\u003e\n\u003cimg src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/1017\/5745\/2662\/files\/navigator-features-1.png\" alt=\"\"\u003e\u003cfigcaption\u003eNavigator Flight Controller features.\u003c\/figcaption\u003e\n\u003c\/figure\u003e\n\u003cp\u003eThe Navigator kit ships with an SD card loaded with \u003ca href=\"https:\/\/blueos.cloud\/docs\/latest\/usage\/overview\/\"\u003eBlueOS\u003c\/a\u003e, our new core operating software for ROVs, USVs, and other robotics. Built on top of Raspbian Linux, it provides a host of features including autopilot software management, video streaming, software updates, and user-defined extensions. It allows you to get started quickly with the Navigator and ArduPilot firmwares.\u003c\/p\u003e\n\u003cp\u003eThe Navigator schematic design is open source and available to help you maximize your usage of the Navigator.\u003c\/p\u003e\n\u003ciframe src=\"https:\/\/www.youtube.com\/embed\/eOHtxa0bOWs?feature=oembed\" allowfullscreen\u003e\u003c\/iframe\u003e\n\u003cp\u003eAdditionally, the Navigator has expansion connectors available, all of which follow the \u003ca href=\"https:\/\/bluerobotics.com\/learn\/wl-connector-standard\/\"\u003eBlue Robotics Connector Standard\u003c\/a\u003e and are compatible with most industry autopilot accessories. It has the following expansion ports:\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e4 serial ports\u003c\/li\u003e\n\u003cli\u003e2 I\u003csup\u003e2\u003c\/sup\u003eC ports\u003c\/li\u003e\n\u003cli\u003e2 16-bit analog-to-digital converter (ADC) ports\u003c\/li\u003e\n\u003cli\u003eExternal LED port compatible with Neopixel RGB LEDs\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003eIn addition, the Navigator has a number of important features that are worth highlighting:\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eDual power inputs with automatic power switching for redundancy\u003c\/li\u003e\n\u003cli\u003e3.3V logic on all ports\u003c\/li\u003e\n\u003cli\u003e5V tolerance on serial ports\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003eThe Navigator comes with a custom designed aluminum heatsink that fits between the Navigator and Raspberry Pi and allows the Raspberry Pi to operate at high CPU usage in poorly cooled environments, like inside an enclosure. There’s a slot in the Navigator board that allows you to use the Raspberry Pi’s CSI camera connector.\u003c\/p\u003e\n\u003cp\u003eThe Navigator kit also comes with a set of expansion cables for the serial, I\u003csup\u003e2\u003c\/sup\u003eC, and ADC ports to allow you to connect your hardware quickly and easily.\u003c\/p\u003e\n\u003cblockquote\u003e The Navigator is \u003cem\u003etechnically\u003c\/em\u003e not a Raspberry Pi “hat” because it \u003ca href=\"https:\/\/github.com\/raspberrypi\/hats\"\u003edoes not meet all of the official requirements\u003c\/a\u003e, however it works very similarly to a Raspberry Pi hat.\u003c\/blockquote\u003e","brand":"Blue Robotics","offers":[{"title":"Default Title","offer_id":58747057308022,"sku":"BR-100367","price":220.0,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1017\/5745\/2662\/files\/IMG_0133-scaled.jpg?v=1789582999"},{"product_id":"otps1kw-asm-rov","title":"ROV Power Supply Enclosure for OTPS","description":"\u003cp\u003eThe ROV Power Supply Enclosure is a component of the Outland Technology Power Supply (OTPS). This component of the system is a drop-in replacement for the battery enclosure on the BlueROV2 and converts high-voltage power from the \u003ca href=\"\/products\/otps1kw-asm-topside-r2\"\u003eTopside Power Supply Unit\u003c\/a\u003e to the low-voltage power needed by the ROV. It’s built into an aluminum 3″ enclosure and is ready to connect to the \u003ca href=\"\/products\/brov2-asm-electronics-r1\"\u003eBlueROV2 electronics enclosure\u003c\/a\u003e and the OTPS high-power tether cable.\u003c\/p\u003e\n\u003cp\u003eThe ROV Power Supply Enclosure has pre-installed power and tether signal cables with penetrators that make it a drop-in replacement for the original BlueROV2 battery tube. The wires in the tether signal cable are connected to the 8 pins on the tether signal connector, allowing pass-through connections for the Fathom-X signal and an auxiliary twisted pair. We have clear instructions on how to install the enclosure on your BlueROV2.\u003c\/p\u003e\n\u003cp\u003eThe enclosure is equipped with two wet-mateable electrical connectors that allow the ROV to be connected and disconnected from the tether cable. One 3-pin connector handles the high-voltage power and ground connection while an 8-pin connector handles the signal connections.\u003c\/p\u003e\n\u003cp\u003eAdded internal features lock the enclosure shut and tamper resistant screws prevent users from accidentally accessing high-voltage electronics.\u003c\/p\u003e\n\u003cp\u003eThis product is available separately, but if you want a complete power system for the BlueROV2 we recommend configuring the complete system from the Outland Technology Power Supply product page.\u003c\/p\u003e","brand":"Outland Technology","offers":[{"title":"Default Title","offer_id":58747057930614,"sku":"BR-100667","price":4730.0,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1017\/5745\/2662\/files\/OTPS1KW-ASM-ROV-R2-3-scaled.jpg?v=1789583002"},{"product_id":"otps1kw-asm-topside-r2","title":"Topside Power Supply Unit for OTPS","description":"\u003cp\u003eThe Topside Power Supply Unit is a component of the Outland Technology Power Supply (OTPS). It converts 100-240 VAC power to 400 VDC power for transmission through the tether. It’s designed with an emphasis on safety, including a LIM\/GFI safety circuit. With a built-in Fathom-X tether interface board, laptop charging outlet, and a laptop shelf, it’s more than just a power supply!\u003c\/p\u003e\n\u003cp\u003eThe power supply is built into a rugged hardshell case that’s easy to transport. It’s designed to be operated with the lid open to provide airflow for cooling and to act as a topside control station for the ROV pilot. The middle section has a laptop shelf so that you can operate from a single tabletop. Next to the laptop shelf at the top left is the tether input connector, a Binder 696 Series. It’s rated for high voltages and has concealed pins for safety. Next to that is a ground wire connector. The unit comes with a ground wire that should be attached to the nearest earth ground for safety.\u003c\/p\u003e\n\u003cp\u003eBelow that is the input power cable that plugs into a normal 100-240 VAC wall outlet. The unit comes with a North American plug (NEMA 5-15) and can be used with a plug adapter to operate with other common plug types. Next to the input power cable is an auxiliary power outlet to plug in your laptop charger during operation. The auxiliary power plug is compatible with several different plugs and doesn’t generally need an adapter. A power switch allows you to power the unit on and off at any time. That switch also power cycles the ROV but doesn’t disconnect power to the auxiliary outlet.\u003c\/p\u003e\n\u003cp\u003eThe inside of the power supply unit is off limits to users for safety reasons, but there is a dedicated user-accessible area on the top of the unit. Inside is a Fathom-X tether interface board, and a USB to Ethernet adapter that replaces the \u003ca href=\"\/products\/fxti-asm-r1-rp\"\u003eFXTI\u003c\/a\u003e that is usually used to connect to the ROV. No FXTI is needed when operating with the power supply unit. There’s also access to a spare twisted pair from the tether that can be used to communicated with payloads like a sonar.\u003c\/p\u003e\n\u003cp\u003eClosest to the user is the most important part of the power supply unit, the GFI safety test feature and status screen. The ground fault interruptor (GFI) is also commonly known to ROV users as a line insulation monitor (LIM). It detects any current leakage on the high-side or low-side of the isolated power supplies and automatically shuts off the outputs if an unsafe level of current leakage is detected. It’s designed to comply with the guidelines of the \u003ca href=\"https:\/\/www.imca-int.com\/publications\/295\/code-of-practice-for-the-safe-use-of-electricity-under-water\/\"\u003eIMCA Code of Practice for the Safe Use of Electricity Under Water\u003c\/a\u003e. The test switch toggles up and down to test high and low-side leakage.\u003c\/p\u003e\n\u003cp\u003eThe status display indicates the health of the power supply unit, the voltage and current output levels, and the history of any GFI faults.\u003c\/p\u003e\n\u003cp\u003eThis product is available separately, but if you want a complete power system for the BlueROV2 we recommend configuring the complete system from the Outland Technology Power Supply product page.\u003c\/p\u003e","brand":"Outland Technology","offers":[{"title":"Default Title","offer_id":58747058028918,"sku":"BR-100626","price":6200.0,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1017\/5745\/2662\/files\/power-supply-top-side-scaled.jpg?v=1789583002"},{"product_id":"psm-asm-r2-rp","title":"Power Sense Module","description":"\u003cp\u003eThe Power Sense Module (PSM) provides analog current and voltage sensing to your \u003ca href=\"\/products\/navigator\"\u003eNavigator Flight Controller\u003c\/a\u003e or Pixhawk autopilot mounted either on your BlueROV2 or custom marine robotics project. \u003ca href=\"http:\/\/ardusub.com\/\"\u003eArduSub\u003c\/a\u003e firmware supports the Power Sense Module and through QGroundControl will give you visual indications of battery level and current consumption.\u003c\/p\u003e\n\u003cp\u003eThis module uses a hall effect current sensor for excellent accuracy at low current draw.\u003c\/p\u003e\n\u003cp\u003eUnlike standard power modules, the Power Sense Module will NOT provide 5V power, only current and voltage sense. On the BlueROV2, the Navigator Flight Controller is powered from multiple sources so this 5V power supply is not needed.\u003c\/p\u003e","brand":"Blue Robotics","offers":[{"title":"Default Title","offer_id":58747059241334,"sku":"BR-101108","price":92.0,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1017\/5745\/2662\/files\/PSM-ASM-R3-RP1-scaled.jpg?v=1789583009"},{"product_id":"qs8-connector","title":"QS8-S Connector Set","description":"\u003cp\u003ePower hungry? You’ve come to the right place.\u003c\/p\u003e\n\u003cp\u003eThe QS8-S is a connector for serious power enthusiasts. It can handle 110A continuous current at up to 600V. It’s similar to the common XT90 connector, but bigger.\u003c\/p\u003e\n\u003cp\u003eThe QS8-S connector comes on our \u003ca href=\"\/products\/mega-battery\"\u003e6S 28Ah Lithium-ion Battery\u003c\/a\u003e and if you want to fully utilize the discharge capability of the battery, then you need to use a mating QS8-S connector in your application.\u003c\/p\u003e\n\u003cp\u003eThis product comes as a set with a male and female connector as well as covers for the wire connections. It requires a good soldering iron and some effort on your part to assemble.\u003c\/p\u003e","brand":"Blue Robotics","offers":[{"title":"Default Title","offer_id":58747059405174,"sku":"BR-100285","price":17.0,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1017\/5745\/2662\/files\/qs8-connector.jpg?v=1789583010"},{"product_id":"raspberry-pi","title":"Raspberry Pi 4 2GB","description":"\u003cp\u003eThe \u003ca href=\"https:\/\/www.raspberrypi.org\/\"\u003eRaspberry Pi 4 Model B (2GB)\u003c\/a\u003e computer is a small but powerful mini computer. For full technical details, please check out the \u003ca href=\"https:\/\/www.raspberrypi.org\/products\/raspberry-pi-4-model-b\/\"\u003eRaspberry Pi 4 website\u003c\/a\u003e. This computer is used on the \u003ca href=\"\/products\/navigator\"\u003eNavigator Flight Controller\u003c\/a\u003e and on the BlueROV2.\u003c\/p\u003e\n\u003cp\u003eAlso check out this \u003ca href=\"\/products\/blueos-microsd-card\"\u003emicro SD card\u003c\/a\u003e, preloaded with the BlueOS software needed for ArduSub and the BlueROV2.\u003c\/p\u003e","brand":"Raspberry Pi","offers":[{"title":"Default Title","offer_id":58747059470710,"sku":"BR-100950","price":65.0,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1017\/5745\/2662\/files\/RPI4-MODELB-2GB-R1-scaled.jpg?v=1789583013"},{"product_id":"switch-10-5a-r1","title":"Switch","description":"\u003cp\u003eThis switch allows you to turn a circuit on and off inside a watertight enclosure without needing to open it! Handling up to 5A of current and 120V AC or 26V DC, you can use it to directly operate low power circuits or interact with a microcontroller to provide input for the operation of your vehicle.\u003c\/p\u003e\n\u003cp\u003eThis design is rated to 1000 meters water depth.\u003c\/p\u003e","brand":"Blue Robotics","offers":[{"title":"Default Title","offer_id":58747060191606,"sku":"BR-100433","price":28.0,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1017\/5745\/2662\/files\/IMG_6511.jpg?v=1789583018"},{"product_id":"xbox-controller","title":"Xbox Wireless Controller","description":"\u003cp\u003eThe BlueROV2 and BlueBoat can be used with any gamepad or joystick controller, but this is the controller that we use and recommend. The Xbox Wireless Controller is ergonomic, precise, and durable enough for ROV operations.\u003c\/p\u003e\n\u003cp\u003eThis controller has:\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e2 force-sensitive joysticks with center-click buttons\u003c\/li\u003e\n\u003cli\u003e16 buttons available for button functions\u003c\/li\u003e\n\u003cli\u003eAdditional 15 functions assignable on a shift layer\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e…all of which can be assigned to functions on the BlueROV2 and BlueBoat or any other ArduSub controlled vehicle.\u003c\/p\u003e\n\u003cp\u003eThe controller has a Bluetooth wireless connection to your computer or device, but you can also connect a USB-C cable to provide a hardwired connection. It is powered by two AA batteries with up to 40 hrs of battery life.\u003c\/p\u003e\n\u003cfigure\u003e\n\u003cimg src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/1017\/5745\/2662\/files\/Screen-Shot-2023-02-13-at-12.44.22-PM-820x1024.png\" alt=\"\"\u003e\n\u003c\/figure\u003e","brand":"Xbox","offers":[{"title":"Blue","offer_id":58747068186998,"sku":"BR-100009","price":70.0,"currency_code":"EUR","in_stock":true},{"title":"Black","offer_id":58747068219766,"sku":"BR-100727","price":70.0,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1017\/5745\/2662\/files\/BR-100009.jpg?v=1789583054"},{"product_id":"cerulean-gps-module","title":"GPS Module","description":"\u003cp\u003eThe Cerulean GPS is rated to 300 meter depth and is designed to have a low non-snag profile and to ward off accidental blows.\u003c\/p\u003e\n\u003cp\u003eThe LC86L is an ultra-compact GNSS module measuring 16.0mm × 16.0mm × 6.95mm with 26 tracking channels and 11 acquisition channels. It is designed to be compatible with Quectel’s GPS L80 module to provide a flexible and scalable platform for migrating from GPS to GNSS.\u003c\/p\u003e\n\u003cp\u003eThe module has an integrated patch antenna and a high-performance GNSS chipset engine (AG3331 or MT3333) to support two GNSS constellations (either GPS + GLONASS or GPS + BeiDou). The LC86L combines advanced AGNSS (assisted GNSS), EASY™ (Embedded Assist System for self-generated orbit prediction), and LOCUS™ (internal logger) to achieve the highest performance.\u003c\/p\u003e","brand":"Cerulean Sonar","offers":[{"title":"Default Title","offer_id":58747180089718,"sku":"DVL75-GPS","price":490.0,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1017\/5745\/2662\/files\/wp-image-31105421803586-1.jpg?v=1789584743"},{"product_id":"cerulean-network-hub","title":"Network Hub","description":"Network Hub unifies your topside network for ROV and sensor operations — eliminating the need for multiple adapters and complex cabling. Its versatile interfaces and flexible power options make it easy to connect laptops, sensors, payloads, and radios into a single reliable network, saving time on setup and reducing points of failure during subsea missions.\nThe Network Hub is a small, purpose-built networking device that bridges different underwater vehicle and topside systems (i.e., Omnitrack and the ROV Locator MK V), enabling them to communicate seamlessly. It connects an ROV, a PC, an Omnitrack geolocation system, and other Ethernet-enabled devices (such as a Wi-Fi radio or a secondary laptop) into a single unified network. It provides multiple physical interface types optimized for subsea use, including a Fathom tether interface, a POE-enabled Binder 700 port for Omnitrack (or an RJ45 POE port for Wi-Fi), USB-C connectivity for a PC, and two RJ-45 Ethernet ports that optionally supply 24 V passive PoE.\n\nThe Network Hub can be powered directly from a laptop USB-C port, a battery bank, or an external 2.1 mm DC barrel input, giving flexibility for both portable and fixed installations. Typical usage includes bridging the ROV network with topside systems for sonar payload control and geolocation.\n\u003cp\u003eThe Network Hub also serves as a complete replacement for the BlueROV Fathom-X Tether Interface.\u003c\/p\u003e\n\u003ch4\u003eBasic configuration 1: powering Wired Omnitrack and Tether interface from PC\u003c\/h4\u003e\n\u003cp\u003e\u003cimg src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/1017\/5745\/2662\/files\/image-copy.jpg\" alt=\"\"\u003e\u003c\/p\u003e\n\u003ch4\u003eBasic configuration 2: Connecting Wi-Fi Omnitrack and Tether interface to PC\u003c\/h4\u003e\n\u003cp\u003e\u003cimg src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/1017\/5745\/2662\/files\/image-2-copy.jpg\" alt=\"\"\u003e\u003c\/p\u003e\n\u003ch4\u003eConvert your Network Hub into a Wi-Fi access point and network bridge\u003c\/h4\u003e\n\u003cstrong\u003e\u003ca href=\"\/products\/network-hub-wi-fi-upgrade-kit\"\u003eNetwork Hub – Wi-Fi Upgrade Kit\u003c\/a\u003e\u003c\/strong\u003e\n\u003cp\u003e\u003cimg src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/1017\/5745\/2662\/files\/Network-Hub-and-wi-fi-copy-2-1024x512.png\" alt=\"\"\u003e\u003c\/p\u003e","brand":"Cerulean Sonar","offers":[{"title":"Default Title","offer_id":58747180122486,"sku":"OMT-NETWORK-HUB","price":990.0,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1017\/5745\/2662\/files\/network-Hub-copy-1.png?v=1789584744"},{"product_id":"manifold-5l-subsea-network-hub","title":"Manifold 5L Subsea Network Hub","description":"\u003cp\u003eManifold 5L brings your underwater Ethernet devices together through a single hub — delivering power and dependable communication across your network. It streamlines integration by reducing penetrations in your main electronics enclosure and simplifying payload swaps. With its optional tether interface, you can power and communicate with systems over long distances, offering flexible deployment for both ROV-based and standalone missions.\u003c\/p\u003e\n\u003cp\u003eThe Manifold 5L is a 5-port POE Ethernet switch. It has six 10mm penetration openings. Power is supplied through the main port, and power is passed through to each of the other four ports through self-resettable fuses. The fuses prevent a short in a connected device from frying circuit board traces or cabling.\u003c\/p\u003e\n\u003cp\u003eThere are two configurations of the Manifold 5L: basic and basic + tether interface.\u003c\/p\u003e\n\u003cp\u003eThe basic switch supports most Ethernet-based ROV add-ons, including one or more Cerulean Sonar OmniScan, Cerulean Sonar DVL-75, Cerulean Sonar Tracker-650 DVL, Cerulean Sonar multibeam echo sounders (MBES), Cerulean Sonar ROV Locator transmitter or receiver, Blue Robotics Ping 360, and so on.\u003c\/p\u003e\n\u003cp\u003eWith the tether interface option, the Manifold series supports an RAK tether interface compatible with the Fathom-X tether drivers used on Blue Robotics BlueROVs. This allows the tether to connect through the Manifold instead of into the ROV’s main electronics enclosure. If used in this way, the switch consumes net zero penetrator holes in the ROV’s main electronics enclosure. If the BAR30 is also moved to the switch (Manifold 5S only), an additional ROV penetrator opening is made available. The Fathom-X board and any Ethernet switch in the main enclosure can typically be eliminated.\u003c\/p\u003e","brand":"Cerulean Sonar","offers":[{"title":"Default Title","offer_id":58747187954038,"sku":"Manifold-5L-Subsea","price":990.0,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1017\/5745\/2662\/files\/Manifold-5L-copy.png?v=1789584767"},{"product_id":"network-hub-wi-fi-upgrade-kit","title":"Network Hub Wi-Fi Upgrade Kit","description":"\u003cp\u003eEnhance your networked subsea positioning system with the Wi-Fi Radio Option for the OmniSwitch Network Hub—turning a standard Network Hub into a powerful wireless access point tailored for Omnitrack deployments.\u003c\/p\u003e\nDesigned to support the Wi-Fi version of the Omnitrack, this option enables the Network Hub to function as both a Wi-Fi access point and a network bridge, allowing not only the Omnitrack surface buoy but also laptops, tablets, and other Wi-Fi devices to seamlessly join the system network.\n\n\u003cp\u003eThis option focuses on delivering robust Wi-Fi connectivity while keeping the core Network Hub capabilities—including bridging between ROV, Omnitrack, and PC networks—intact. Unit is powered from the Network Hub, powered over Ethernet.\u003c\/p\u003e\n\u003cp\u003eThe Wi-Fi radio arrives pre-configured as an access point for Omnitrack, minimizing setup time: once connected, no additional network configuration is typically required to get Omnitrack and connected devices online.\u003c\/p\u003e\n\u003cp\u003eIdeal for surveys, inspections, and untethered operations where wireless communication and flexible device connectivity are essential, the Wi-Fi Radio Option unlocks greater operational freedom without sacrificing network stability or performance.\u003c\/p\u003e\n\u003ch3\u003eConvert your Network Hub into a Wi-Fi access point\u003c\/h3\u003e\n\u003cp\u003e\u003cimg src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/1017\/5745\/2662\/files\/Network-Hub-and-wi-fi-copy-2-1024x512.png\" alt=\"\"\u003e\u003c\/p\u003e","brand":"Cerulean Sonar","offers":[{"title":"Default Title","offer_id":58747187986806,"sku":"OMT-NETWORK-HUB-CADDY","price":300.0,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1017\/5745\/2662\/files\/Network-hub-accessories-copy.jpg?v=1789584767"},{"product_id":"7-port-camera-usb-hub","title":"DWE 7-Port Camera Hub","description":"\u003cp\u003eProviding underwater robots the ability to perceive the ocean is an important mission behind our cameras. With the Camera Hub, you can now connect 7 cameras in one port with low latency and extreme reliability. Whether you are looking to increase the efficiency in your mission, improve the capabilities in your autonomous systems, or add further tooling options in your vehicle, the Camera Hub board will enable you to complete these goals by providing you with the vision needed. \u003c\/p\u003e\n\u003cp\u003eDesigned to be as easy to use as possible: plug and play with our cameras, no soldering required, no drivers needed, easy to mount on the most popular underwater systems (BlueROV, Raspberry Pi, etc).\u003c\/p\u003e","brand":"DWE","offers":[{"title":"Default Title","offer_id":58747331051894,"sku":"DWE-USB7PCH","price":80.0,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1017\/5745\/2662\/files\/7-Port-Mux-Rev2.jpg?v=1789586023"},{"product_id":"ethernet-fiber-converter","title":"Gigabit Fiber to Ethernet Converter Board","description":"\u003cp\u003e\u003cem\u003e10\/100\/1000M Copper to 1000Base-X Fiber\u003c\/em\u003e\u003c\/p\u003e\n\u003cp\u003eThis bare PCB converts CAT 5 Ethernet signals from the RJ-45 port to signals compatible with single mode SFP transceivers and vice versa. By using this media converter, copper Ethernet signals can be extended up to 20km depending on the SFP transceiver used\u0026amp;nbsp;(a much larger distance than the 100 meters limit for copper Ethernet signals).\u003c\/p\u003e\n\u003cp\u003eUnlike many other fiber converters, this is designed to be as space efficient as possible specifically for ROV use cases. It can be easily paired with almost all single-board computers (Raspberry Pi, Nvidia Jetson). Additionally, many considerations were in place to design this board as power efficient as possible, reducing generated heat and maximizing the flight time on your ROV!\u003c\/p\u003e","brand":"DWE","offers":[{"title":"Default Title","offer_id":58747332428150,"sku":"DWE-FTEUWR1","price":130.0,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1017\/5745\/2662\/files\/GigabitFibertoEthernetConverter.jpg?v=1789586026"},{"product_id":"micro-subsea-vision-computer-with-poe-rov-auv","title":"Micro Subsea Vision Computer with POE (ROV\/AUV)","description":"\u003cp\u003e\u003cstrong\u003e🚨August 2026: Please note that due to the current RPi Zero 2W shortage, this product is currently unavailable for purchase.\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eStruggling with integrating new USB vision systems into your ROV or AUV? Put your worries to rest with our state-of-the-art customizable module. This innovative solution transforms your integration experience into a seamless plug-and-play process, allowing you to direct your focus towards the task at hand.\u003c\/p\u003e\n\u003cp\u003eThis compact module introduces a new realm of possibilities by effortlessly integrating modern USB-based equipment, such as our cutting-edge exploreHD cameras designed for marine robotics. The beauty lies in its simplicity – requiring just one freed bulkhead penetrator\/connector on your main vehicle. Through this integration, you gain the ability to manage USB devices via Ethernet connectivity.\u003c\/p\u003e\n\u003cp\u003eWhat sets this module apart is its robust onboard computing capability. This translates into a diverse range of functionalities, from intricate video stitching to precise distortion correction, and even immersive stereo vision. With the added advantage of the DWE OS, you attain unparalleled control over each individual camera. Upon plugging in all 3 cameras, the module seamlessly converts them into distinct UDP streams, enhancing your operational efficiency.\u003c\/p\u003e\n\u003cp\u003eWe cater to your specific needs by offering an array of connector and penetrator options. From the reliable Blue Robotics WetLink to the advanced BlueTrail Cobalt, our range encompasses top-tier choices. If your preferred penetrator type isn't explicitly listed, we encourage you to connect with us directly. Our dedicated team is here to assist in accommodating your unique requirements.\u003c\/p\u003e\n\u003cp\u003eElevate your integration experience today – embrace the future of marine robotics with our transformative module.\u003c\/p\u003e\n\n\u003ch2\u003eCompatible Products\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003e\u003cstrong\u003e\u003ca href=\"\/products\/explorehd\"\u003eexploreHD (Cobalt)\u003c\/a\u003e\u003c\/strong\u003e\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e\u003ca href=\"\/products\/explorehd-heavy\"\u003eexploreHD Heavy (Cobalt)\u003c\/a\u003e\u003c\/strong\u003e\n\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003econtact sales for more information.\u003c\/strong\u003e\u003c\/p\u003e","brand":"DWE","offers":[{"title":"Cobalt Connectors \/ 4 (3 USB\/1 Ethernet) \/ 600M","offer_id":58747335278966,"sku":"DWE-MSVC-C","price":950.0,"currency_code":"EUR","in_stock":true},{"title":"SubConn Connectors \/ 4 (3 USB\/1 Ethernet) \/ 1000M","offer_id":58747335311734,"sku":"DWE-MSVC-SC1KM","price":1650.0,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1017\/5745\/2662\/files\/microSVC_Main.jpg?v=1789586036"},{"product_id":"subsea-vision-computer","title":"Subsea Vision Computer with POE (ROV\/AUV)","description":"\u003cp\u003eStruggling with integrating new USB vision systems into your ROV or AUV? Put your worries to rest with our state-of-the-art customizable module. This innovative solution transforms your integration experience into a seamless plug-and-play process, allowing you to direct your focus towards the task at hand.\u003c\/p\u003e\n\u003cp\u003eThis compact module introduces a new realm of possibilities by effortlessly integrating modern USB-based equipment, such as our cutting-edge exploreHD cameras designed for marine robotics. The beauty lies in its simplicity – requiring just one freed bulkhead penetrator\/connector on your main vehicle. Through this integration, you gain the ability to manage USB devices via Ethernet connectivity.\u003c\/p\u003e\n\u003cp\u003eWhat sets this module apart is its robust onboard computing capability. This translates into a diverse range of functionalities, from intricate video stitching to precise distortion correction, and even immersive stereo vision. With the added advantage of the DWE OS, you attain unparalleled control over each individual camera. Upon plugging in all 5 cameras, the module seamlessly converts them into distinct UDP streams, enhancing your operational efficiency.\u003c\/p\u003e\n\u003cp\u003eWe cater to your specific needs by offering an array of connector and penetrator options. From the reliable Blue Robotics WetLink to the advanced BlueTrail Cobalt, our range encompasses top-tier choices. If your preferred penetrator type isn't explicitly listed, we encourage you to connect with us directly. Our dedicated team is here to assist in accommodating your unique requirements.\u003c\/p\u003e\n\u003cp\u003eElevate your integration experience today – embrace the future of marine robotics with our transformative module.\u003c\/p\u003e","brand":"DWE","offers":[{"title":"Cobalt Connectors \/ 6 (5 USB\/1 Ethernet) \/ 600M","offer_id":58747337245046,"sku":"DWE-SVC-C-6P-600M","price":1560.0,"currency_code":"EUR","in_stock":true},{"title":"SubConn Connectors \/ 6 (5 USB\/1 Ethernet) \/ 600M","offer_id":58747337277814,"sku":"DWE-SVC-SC-6P-600M","price":4080.0,"currency_code":"EUR","in_stock":true},{"title":"SubConn Connectors \/ 6 (5 USB\/1 Ethernet) \/ 1000M","offer_id":58747337310582,"sku":"DWE-SVC-SC-6P-1KM","price":4280.0,"currency_code":"EUR","in_stock":true},{"title":"SubConn Connectors \/ 6 (5 USB\/1 Ethernet) \/ 6000M","offer_id":58747337343350,"sku":"DWE-SVC-SC-6P-6KM","price":6280.0,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1017\/5745\/2662\/files\/svc_pRO.jpg?v=1789586041"},{"product_id":"svc-pro","title":"SVC Pro (NVIDIA Jetson Orin NX 16GB)","description":"\u003cp\u003e\u003cb\u003eThe Intelligent Hub for Subsea Stereo Vision\u003c\/b\u003e\u003c\/p\u003e\n\u003cp\u003eThe SVC Pro is the central processing and interface module designed to unlock the full potential of the explore3D, stellarHD, and aquaLUX lighting systems. Acting as the brain of your subsea imaging setup, the SVC Pro streamlines integration by automatically managing complex frame synchronization and strobe timing, allowing operators to focus on data capture rather than configuration.\u003c\/p\u003e\n\u003cp\u003e\u003cb\u003ePowerful Onboard Compute for Autonomy\u003c\/b\u003e\u003c\/p\u003e\n\u003cp\u003ePowered by an \u003cb\u003eNvidia Jetson Orin NX 16GB\u003c\/b\u003e, the SVC Pro delivers edge AI performance capable of handling complex machine vision models, real-time 3D reconstruction, and autonomous navigation tasks directly on the vehicle. With \u003cb\u003e1TB of onboard storage\u003c\/b\u003e, it provides ample space for high-resolution data logging and OS flexibility.\u003c\/p\u003e\n\u003cp\u003e\u003cb\u003eOpen \u0026amp; Flexible Architecture\u003c\/b\u003e\u003c\/p\u003e\n\u003cp\u003eCustomers have full control over the operating system, enabling the installation of custom software stacks, ROS (Robot Operating System), or proprietary autonomy algorithms. The SVC Pro is not just a camera interface—it is a complete edge computing solution for intelligent subsea operations.\u003c\/p\u003e\n\n\u003ch3\u003e\u003cb\u003eKey Features\u003c\/b\u003e\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cp\u003e\u003cb\u003eEdge AI Performance:\u003c\/b\u003e Integrated \u003cb\u003eNvidia Jetson Orin NX (16GB RAM)\u003c\/b\u003e for high-performance computing and machine learning. Live Stereo Compute and VSLAM capable. \u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cp\u003e\u003cb\u003eLarge Internal Storage:\u003c\/b\u003e Includes \u003cb\u003e1TB SSD\u003c\/b\u003e for extensive data recording and OS management.\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cp\u003e\u003cb\u003ePlug-and-Play Management:\u003c\/b\u003e Automatically configures cameras to \"Follower\" mode and manages all clock signals to ensure precise frame synchronization without external hardware.\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cp\u003e\u003cb\u003eMulti-Camera Support:\u003c\/b\u003e Capable of streaming up to \u003cb\u003e4x stellarHD\u003c\/b\u003e cameras or \u003cb\u003e2x explore3D\u003c\/b\u003e stereo pairs simultaneously.\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cp\u003e\u003cb\u003eIntelligent Strobe Lighting Integration:\u003c\/b\u003e Synchronizes strobe pulses directly with the camera’s exposure window for motion-blur-free imagery.\u003c\/p\u003e\n\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"DWE","offers":[{"title":"Cobalt Connectors \/ 7 (4 Camera\/1 Light\/1 Power Input\/1 GigE) \/ 600M","offer_id":58747338490230,"sku":"DWE-SVC-PRO-C-6P-6HM","price":12500.0,"currency_code":"EUR","in_stock":true},{"title":"SubConn Connectors \/ 7 (4 Camera\/1 Light\/1 Power Input\/1 GigE) \/ 2000M","offer_id":58747338522998,"sku":"DWE-SVC-PRO-SC-6P-2KM","price":14500.0,"currency_code":"EUR","in_stock":true},{"title":"SubConn Connectors \/ 7 (4 Camera\/1 Light\/1 Power Input\/1 GigE) \/ 6000M","offer_id":58747338555766,"sku":"DWE-SVC-PRO-SC-6P-6KM","price":19500.0,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1017\/5745\/2662\/files\/svc_pRO_8a202874-3799-46f9-925b-3339239f04d3.jpg?v=1789586042"},{"product_id":"usb-c-otg-rov-auv-usb-camera-host-device-adapter","title":"USB-C OTG ROV\/AUV USB Camera Host Device Adapter","description":"\u003cp\u003eThis adapter allows you to converts a USB-A Male connector to USB-C. Typical USB-A to USB-C adapters don't work due to a lack of the required 5.1kΩ pull-down resistor needed for OTG (On-The-Go) functionality. This adapter includes the proper circuitry to ensure your host device correctly recognizes, powers, and communicates with your exploreHD or stellarHD camera.\u003c\/p\u003e","brand":"DWE","offers":[{"title":"Default Title","offer_id":58747338654070,"sku":"DWE-OTG","price":15.0,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1017\/5745\/2662\/files\/OTG-Adapter.jpg?v=1789586044"},{"product_id":"starlink-mini","title":"Starlink Mini","description":"\u003cp\u003eStarlink Mini satellite internet terminal for long-range communication with the BlueBoat.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eStarlink subscription not included.\u003c\/strong\u003e The service plan is purchased separately from Starlink.\u003c\/p\u003e","brand":"Starlink","offers":[{"title":"Default Title","offer_id":58768257089910,"sku":"STARLINK-MINI","price":500.0,"currency_code":"EUR","in_stock":true}]},{"product_id":"teltonika-rutc50-5g-router","title":"Teltonika RUTC50 v2 5G Router","description":"\u003cp\u003eTeltonika RUTC50 v2 5G router for 4G\/5G mobile data connectivity on the BlueBoat.\u003c\/p\u003e\u003cp\u003eMobile data subscription (SIM) not included.\u003c\/p\u003e","brand":"Teltonika","offers":[{"title":"Default Title","offer_id":58768289235318,"sku":"TELTONIKA-RUTC50","price":750.0,"currency_code":"EUR","in_stock":true}]},{"product_id":"poynting-mimo-4-17-v2-antenna-kit","title":"Poynting MIMO-4-17 V2 7-in-1 5G\/4G\/WiFi\/GPS Antenna Kit","description":"\u003cp\u003ePoynting MIMO-4-17 V2 7-in-1 antenna for 5G\/4G, WiFi and GPS on the BlueBoat.\u003c\/p\u003e\u003cp\u003eThe kit includes the antenna, mast, deck penetration and cables.\u003c\/p\u003e","brand":"Poynting","offers":[{"title":"Default Title","offer_id":58768289268086,"sku":"POYNTING-MIMO-4-17-V2-KIT","price":500.0,"currency_code":"EUR","in_stock":true}]},{"product_id":"sms-6s-32ah-battery","title":"6S 32Ah Battery","description":"\u003cp\u003e6S lithium battery pack with 32 Ah capacity for the Tyrsky unmanned surface vessel. Sold per battery — choose how many you need in the Tyrsky configurator, or add spares here.\u003c\/p\u003e\u003cp\u003eLithium batteries ship as dangerous goods and are delivered within Europe only.\u003c\/p\u003e","brand":"Sub Marine Store","offers":[{"title":"Default Title","offer_id":58814310580598,"sku":"SMS-BAT-6S-32AH","price":900.0,"currency_code":"EUR","in_stock":true}]}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1017\/5745\/2662\/collections\/hf_20261009_162413_7f97f6a3-92a7-454a-a9eb-371e76990acf.png?v=1791563107","url":"https:\/\/www.substore.fi\/collections\/control-communication-power.oembed","provider":"Sub Marine Store","version":"1.0","type":"link"}