{"product_id":"bluerov2-base","title":"BlueROV2","description":"\u003cp\u003eThe BlueROV2 is a high-performance, highly customizable \u003ca href=\"https:\/\/bluerobotics.com\/learn\/what-is-an-rov\/\"\u003eunderwater ROV\u003c\/a\u003e with an unprecedented level of flexibility and expandability. It comes in six- and eight-thruster configurations, is equipped with open-source software, and has a variety of accessories to enhance its functionality. With thousands of units in use, the BlueROV2 is one of the most popular underwater drones, capable of adapting to both simple and advanced missions.\u003c\/p\u003e\n\u003cp\u003eThe BlueROV2 comes partially assembled and requires 6–8 hours of assembly. This hands-on process gives you a deeper understanding of the system, making it easy to upgrade or modify your ROV as your needs evolve.\u003c\/p\u003e\n\u003ch3\u003eLow-light Camera and Really Bright Lights\u003c\/h3\u003e\n\u003cp\u003eA forward-facing, high-definition (1080p, 30fps) camera is housed inside the electronics enclosure of the ROV. This wide-angle, low-light camera is mounted to a tilt mechanism, allowing the pilot to aim it up or down independently of the ROV.\u003c\/p\u003e\n\u003cp\u003eThe ROV can be configured with two or four dimmable \u003ca href=\"\/products\/lumen-sets-r2-rp\"\u003eLumen Lights\u003c\/a\u003e, providing up to 6,000 lumens to illuminate the ocean depths.\u003c\/p\u003e\n\u003ciframe src=\"https:\/\/www.youtube.com\/embed\/uugmuZINbW0?feature=oembed\" allowfullscreen\u003e\u003c\/iframe\u003e\n\u003cfigure\u003e\n\u003cimg src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/1017\/5745\/2662\/files\/BLUEROV2_04-770x510-1.jpg\" alt=\"\"\u003e\n\u003c\/figure\u003e\n\u003ch3\u003eVectored Thruster Configuration and the Heavy Kit\u003c\/h3\u003e\n\u003cp\u003eThe ROV uses the patented \u003ca href=\"\/products\/t200-thruster-r2-rp\"\u003eT200 Thrusters\u003c\/a\u003e in a vectored configuration, providing a high thrust-to-weight ratio and the ability to move precisely in any direction. The ROV comes with six thrusters but is expandable to eight thrusters with the Heavy Configuration Retrofit Kit, providing full six-degree-of-freedom control and improved stability.\u003c\/p\u003e\n\u003cp\u003eAdjustable gain settings on the ROV allow you to fine-tune responsiveness for the task at hand, giving you precise control at very low speeds as well as the power needed to overcome currents or carry heavy loads.\u003c\/p\u003e\n\u003ch3\u003eDepth Rating up to 300 meters\u003c\/h3\u003e\n\u003cp\u003eThe BlueROV2 can be configured with either acrylic plastic or anodized aluminum enclosures. The acrylic enclosures are rated to a depth of 100 meters (330 ft), and the aluminum enclosures are rated to a depth of 300 meters (985 ft). The ROV is constructed from high-quality components, like our Locking Watertight Enclosures and WetLink Penetrators, and comes with a vacuum test pump to ensure your Watertight Enclosures are actually watertight.\u003c\/p\u003e\n\u003ch3\u003eBuild the ROV You Need\u003c\/h3\u003e\n\u003cp\u003eDesigned like a work-class or research-class ROV, the BlueROV2 has an open frame that carries the ROV’s standard components. This simple design is robust and expandable, making it easy to attach additional accessories, such as a \u003ca href=\"\/products\/newton-gripper-asm-r2-rp\"\u003egripper\u003c\/a\u003e or \u003ca href=\"\/products\/ping360-sonar-r1-rp\"\u003escanning sonar\u003c\/a\u003e. We also have a \u003ca href=\"\/products\/brov-payload-skid\"\u003epayload skid\u003c\/a\u003e available that extends the frame further, providing more space for larger payloads, like additional battery enclosures.\u003c\/p\u003e\n\u003cp\u003eThe BlueROV2 is designed to be modified and expanded upon. It can be tailored to fit just about any underwater task you can imagine! Some things we’ve seen our customers do with the BlueROV2:\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eSearch and Recovery\u003c\/li\u003e\n\u003cli\u003e\u003ca href=\"https:\/\/bluerobotics.com\/grow-line\/\"\u003eAquaculture\u003c\/a\u003e\u003c\/li\u003e\n\u003cli\u003eEnvironmental Research\u003c\/li\u003e\n\u003cli\u003eInspections\u003c\/li\u003e\n\u003cli\u003ePhotogrammetry\u003c\/li\u003e\n\u003cli\u003eInvasive Species Eradication\u003c\/li\u003e\n\u003cli\u003e\u003ca href=\"https:\/\/bluerobotics.com\/bluesteam-ahead\/\"\u003eEducational Outreach\u003c\/a\u003e\u003c\/li\u003e\n\u003cli\u003eEco-Tourism\u003c\/li\u003e\n\u003cli\u003eDevelopment and Testing Platform\u003c\/li\u003e\n\u003cli\u003eComputer Vision\u003c\/li\u003e\n\u003cli\u003eBathtub Toy (jk don’t do that)\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cfigure\u003e\n\u003cimg src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/1017\/5745\/2662\/files\/Abyss-case-study-1.jpg\" alt=\"\"\u003e\u003cfigcaption\u003ePhoto credit: Abyss Solutions\u003c\/figcaption\u003e\n\u003c\/figure\u003e\n\u003cfigure\u003e\n\u003cimg src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/1017\/5745\/2662\/files\/QGCdemo.png\" alt=\"\"\u003e\n\u003c\/figure\u003e\n\u003ch3\u003ePowered by the Navigator and BlueOS\u003c\/h3\u003e\n\u003cp\u003eThe BlueROV2 is controlled by the \u003ca href=\"\/products\/navigator\"\u003eNavigator Flight Controller\u003c\/a\u003e and \u003ca href=\"https:\/\/bluerobotics.com\/what-is-blueos\/\"\u003eBlueOS\u003c\/a\u003e. The Navigator is designed and built for ROVs and other robotics applications. It has onboard sensors, including an inertial measurement unit (IMU) to measure orientation, a magnetometer to measure compass heading, and a leak sensor to alert you of any water ingress. It has 16 outputs that can be connected to thrusters, lights, grippers, and other accessories as well as plenty of serial and I\u003csup\u003e2\u003c\/sup\u003eC ports to communicate with sensors and sonars. It has plenty of room for expandability!\u003c\/p\u003e\n\u003cp\u003eThe Navigator is coupled with a Raspberry Pi 4 computer, which handles all of the processing and computing requirements within the ROV. It runs our open-source BlueOS software that provides the tools and features necessary to operate and expand the vehicle. BlueOS runs the \u003ca href=\"https:\/\/ardupilot.org\/sub\/docs\/introduction.html\"\u003eArduSub\u003c\/a\u003e vehicle control software, manages the camera and tether connection, and makes it easy to install extensions to add new features. BlueOS is always improving, and new capabilities will continue to roll out to all BlueROV2s.\u003c\/p\u003e\n\u003cp\u003eAt the surface, the pilot controls the ROV with a gamepad controller and a laptop running Cockpit, our open-source ground control station. Cockpit is a highly customizable user interface for vehicle control, live video, and sensor data.\u003c\/p\u003e\n\u003ch3\u003eConfiguring Your Kit\u003c\/h3\u003e\n\u003cp\u003eThe BlueROV2 is built for just about everyone, from first-time operators to seasoned pros. You can configure your kit with the tools and features that fit your mission best. Here’s a breakdown of each option:\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eTube Configuration – Choose either Aluminum for 300 m depth rating or Acrylic for 100 m depth rating.\u003c\/li\u003e\n\u003cli\u003eHeavy Configuration Upgrade – Adds two thrusters and more buoyancy for additional stability and payload-carrying capacity.\u003c\/li\u003e\n\u003cli\u003eTether – Comes in standard and slim versions, with lengths from 25 to 300 meters. The length you choose depends on how deep and how far you want to go. For lengths over 50 meters, we’d recommend the Fathom Spool to make it easier to manage.\u003c\/li\u003e\n\u003cli\u003eLights – Available in 2-light or 4-light configurations. If you plan to do a lot of work in poor lighting conditions or at night, we recommend the 4-light configuration.\u003c\/li\u003e\n\u003cli\u003eTether Spool – Makes it easier to transport and use the tether cable. The standard spool size fits up to 150 m of standard tether or 200 m of slim tether. Get the large size for longer tethers.\u003c\/li\u003e\n\u003cli\u003eGamepad Controller – We really like the \u003ca href=\"\/products\/xbox-controller\"\u003eXbox Wireless Controller\u003c\/a\u003e, but many other controllers will also work.\u003c\/li\u003e\n\u003cli\u003eSonars – Can assist with navigation and locating underwater objects. To learn more, check out our \u003ca href=\"https:\/\/bluerobotics.com\/learn\/a-smooth-operators-guide-to-underwater-sonars-and-acoustic-devices\/\"\u003eSmooth Operator’s Guide to Underwater Sonars and Acoustic Devices\u003c\/a\u003e.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003eCheck out The BlueROV2 Accessories and Add-ons for more!\u003c\/p\u003e\n\u003cfigure\u003e\n\u003cimg src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/1017\/5745\/2662\/files\/BLUEROV2_05-770x510-rev.jpg\" alt=\"\"\u003e\n\u003c\/figure\u003e\n\u003cfigure\u003e\n\u003cimg src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/1017\/5745\/2662\/files\/WILL-ROV-BOAT-1.png\" alt=\"\"\u003e\n\u003c\/figure\u003e\n\u003ch3\u003eBefore You Dive\u003c\/h3\u003e\n\u003cp\u003eAnd while the BlueROV2 kit gives you the vehicle, there are a few essentials you will need to supply on your own. Things like a laptop, battery, and charger are not included in the kit, but are required to operate your ROV. Here are our recommendations to help you choose the right setup:\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eLaptop – We recommend a medium to high-end model with Windows 11, Mac, or Linux operating systems. Check out the system requirements in the Technical Details section below. iOS and Android are not officially supported at this time.\u003c\/li\u003e\n\u003cli\u003eBattery – We recommend our 14.8v, 18Ah \u003ca href=\"\/products\/battery-li-4s-18ah-r3\"\u003elithium-ion battery\u003c\/a\u003e for the best battery life. There are a number of other \u003ca href=\"https:\/\/bluerobotics.com\/learn\/bluerov2-buyers-guide-by-options\/#finding-an-alternative-battery\"\u003ecompatible batteries\u003c\/a\u003e that can be used as well. We’d recommend getting a few for extended operation.\u003c\/li\u003e\n\u003cli\u003eBattery Charger – We have a recommended \u003ca href=\"\/products\/battery-charger-h6pro-r1\"\u003echarger\u003c\/a\u003e as well, but any lithium-ion battery charger that can handle your battery will work!\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eBut wait, there's more!\u003c\/h3\u003e\n\u003cp\u003eIf you’re looking to dive even deeper and explore what else is possible with the BlueROV2, we recommend the following resources:\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003ca href=\"https:\/\/bluerobotics.com\/what-is-blueos\/\"\u003eBlueOS\u003c\/a\u003e – Explore the documentation and developer guide for BlueOS, the software that controls the ROV.\u003c\/li\u003e\n\u003cli\u003eArduSub – Learn about the vehicle control firmware in the \u003ca href=\"https:\/\/ardupilot.org\/sub\/docs\/introduction.html\"\u003eArduPilot docs\u003c\/a\u003e.\u003c\/li\u003e\n\u003cli\u003eForums – Our forums have discussions from many users who have made significant modifications and can provide guidance and ideas.\u003c\/li\u003e\n\u003cli\u003eDistributors – Many of our Distributors specialize in BlueROV2 customizations and modifications!\u003c\/li\u003e\n\u003cli\u003e\n\u003ca href=\"https:\/\/bluerobotics.com\/guide-tag\/bluerov2\/\"\u003eGuides\u003c\/a\u003e – Check out all of our BlueROV2-related guides.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cfigure\u003e\n\u003cimg src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/1017\/5745\/2662\/files\/blueos-logo-2.png\" alt=\"\"\u003e\n\u003c\/figure\u003e","brand":"Blue Robotics","offers":[{"title":"Aluminum - 300 m","offer_id":58747051901302,"sku":"BR-100196","price":5300.0,"currency_code":"EUR","in_stock":true},{"title":"Acrylic - 100 m","offer_id":58747051934070,"sku":"BR-100415","price":4900.0,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1017\/5745\/2662\/files\/IMG_6529-scaled.jpg?v=1789754594","url":"https:\/\/www.substore.fi\/products\/bluerov2-base","provider":"Sub Marine Store","version":"1.0","type":"link"}